Hemera Volcano Double Fan 4020 Mount

This is a mount to support two 4020 fans for your Hemera + Volcano extruder. I don't think the measures will work for a standard  v6. I didn't try it, but I think it won't work. I designed specifically for a Hemera + Volcano setup.

Take in consideration this mount probably will add weight to an already heavy extruder like the Hemera, but, depending on your needs, it could add value by providing a stronger cooling system.

It is designed to hold two 4020 fans, not the more common 5015, this trying to keep the mount as small as I could (it is not small either way)

Printing:

You might need a few support on at least one of the borders, just to make sure the cavity for one of the nuts don't get screwed when printed.

To mount you will required:

- 2 M3 * 16 screws and their respective M3 nuts to hold the fans to the mount
- 2 M3 * 5 screws and 1 uxcell M3x5.5mmx2mm to hold the mount to the Hemera (only 1, because the extruder already has one embedded). Like this: https://www.amazon.com/gp/product/B018503K94/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1
- 2 4020 fans,. Like this: https://www.amazon.com/gp/product/B07L2YH79Y/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1

You will require some welding work. There is a decent examples of it on the internet.

DoubleFan4020Base_HemeraVolcano.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

diego.garcia.segura

Achievements

Seedling

Hemera Volcano Double Fan 4020 Mount