Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4978332.

Here is a remix of the Jack'O lantern to fit a light bulb.

I modified the centre of the pumpkin to fit the IKEA HEMMA electric mount.

In order to install the mount, you have to enlarge it to 200%.



Jack O'Lantern for light

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5426708.

This is a cooling that I have adapted for my printers. I installed it on my CR-10 V3 with an E3D V6 hotend and for my Ender 3 V2 with an E3D V6 hotend too.

The fans used are 4010 for the hotend and 5015 for the nozzle.

To hold the 5015 fan, on an Ender 3 V2 you can reuse the existing screws for the nozzle fan, otherwise provide small screws

E3D v6 hotend cooling

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4981103.

I used this filament guide for the ender 3 to make a guide without taking anything apart on the printer to install it : https://www.thingiverse.com/thing:3052488

You will need to print:
1 - bracket
1 - ring
2 - spacers

Plus you will need:
1 - 608 bearing (probably the most commonly available bearing, used for skateboard wheels and other things).
1 - M4 x 18mm or 6-32 x 3/4 bolt

CR-10 V3 filament roller guide

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5123870.

It's an infinite tree, you can make it any size you want.

The top and the first slice must be at the same scale

Each slice must be 20% larger than the previous one.
Ex : slice 1 : 100%, slice 2 : 120%, slice 3 : 144% (+20% of 120), etc

For the trunk, it must be enlarged to the same scale as the last slice

Infinite Christmas tree

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5427226.

Juste a scan of the fusilli

Pasta fusilli

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5404497.

The support of the beagle camera allows to put it in the 2 directions, what allows to make timelapse format 16:9 or 9:16

You will need screws, in my case, I used wood screws #6 3/4" (metric 4x20mm) to hold the camera and a longer one to assemble the two parts

Beagle camera holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5078649.

I modeled these stand legs to be able to reuse a floor board and make a monitor stand for my office

Monitor stand legs

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4986039.

spatula through hand

the space for the hand makes 23mm of base
Enlarge it so that your hand can fit through

You need :
- 1 blade
- 2 handles
- glue

Halloween spatula

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5388263.

it's a remix of the Beagle Camera support but to be able to position it to make time-lapse in Tiktok format.

You will need screws, in my case, I used two wood screws #6 3/4" (metric 4x20mm)

Beagle Camera bracket

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

dfactory