Venomous Serpent Walking Stick Topper

(Simple 22mm Hole | Detailed 22mm Hole | Simple Solid | Detailed Solid)

A dramatic cobra cane handle featuring an aggressive open-mouthed serpent with extended fangs and curved S-shaped neck.

Designed for cosplay canes, villain props, gothic walking sticks, or luxury fantasy builds.

Available in both simplified and highly detailed versions.

Perfect for:

• Victorian villain cosplay • Gothic aristocrat characters • Dark fantasy builds • Vampire / occult aesthetics • Fantasy walking staff builds • Display prop canes

Versions Included:

• Simple – 22mm hole • Detailed – 22mm hole • Simple – Solid • Detailed – Solid

Always measure your pole before printing.

📏 Measuring Instructions

Measure your cane shaft diameter with calipers.

Confirm it matches 22mm.

If slightly loose, adjust scale 101–102%.

If tight, scale down 98–99%.

Test print lower collar section first if unsure.

🖨️ Printing Instructions Recommended Materials

• PLA / PLA+ • PETG • PLA-HT • FPLA • Elastomer-based filament (for convention-safe builds)

For wearable cosplay: PETG or PLA-HT recommended for durability.

Layer Height

0.12–0.16 mm for detailed scales 0.2 mm acceptable for Simple version

Infill

30–40% recommended for structural strength Higher infill for functional display cane

Supports

Required under:

• Lower jaw • Fang overhangs • Inner mouth cavity

Print upright for best surface finish.

🔥 Fit Adjustment Tip

If the fit is slightly tight after printing:

Use a hairdryer or heat gun (low setting) Warm the inner collar gently Slide onto shaft Allow to cool for secure fit

🎨 Finishing & Painting Ideas

Classic finishes:

• Metallic antique gold • Polished brass • Gloss black serpent • Dark emerald scales + gold dry brush • Bone + dark wash horror style

Painting method:

Prime black

Metallic dry brush

Dark wash between scales

Highlight fang edges

Gloss seal for luxury finish

Add glass or resin eyes for extra realism.