Last year I created the Surprise Giftbox which turned out to be a huge hit!
Today and specially for Halloween I present you the Surprise Coffin!
It comes with 2 skeletons - a good guy and a bad guy, and several cover types .
The coffin is a print-in-place with 3MF files included with a very small amount of waste , But you can color it with a regular printer as well by switching colors mid-print!

Please read the instructions:

**Printing:**

- The MF skeleton requires supports only under his hands, create some manual supports for this (Although it might print well without)
- Coffin: No supports, No Brim, Very good adhesion is needed and be careful of warping if you don't have enclosed printer. If you print using AMS - you can disable prime tower to save some filament.
- Mattress: Create a custom support for part of the lower area if it falls. Do not print it laying down as quality will be worse.
- Covers - All require supports for the bottom, with AMS you can remove prime tower.
- For all coloring with a regular printer you can swap filaments mid-print to get same results.

**Scale:**

Best size is the one provided - You can scale down until stuff start fusing together (I printed successfully at 80%)

You can also scale UP - But the overhangs of the hinges will be big so it might not close smoothly depending on your printer's bridging abilities.

Skeleton - If you want to print it bigger - wait a day or two as I will release a special version which will be made exactly for this purpose!

Hope you like this little toy!

Surprise Coffin

Skelleton_middlefinger.stl

Flexible Cat Skeleton
Print each piece in the default orientation to ensure a successful print. (See printing guide in the images)
Printing on Creality k1
Layer: 0.2mm
Support: Yes (Some parts require less support, see reference image)
Walls: 3 (loc-lines 6 walls)
Other default settings
Assembly
Once printed, join the body L and R parts with connectors A and B, and apply a bit of glue. Then, attach the claw L and R to the body, followed by attaching the paw L and R. Next, attach the ears to the top of the head and then glue the lower part of the head. Finally, connect the loc lines (recommended 4 for the neck and 12 for the tail).

Flexible Cat Skeleton

Upper head.stl

My spider model, but the body is replaced by a pumpkin.

Happy Halloween!



Pumpkin Spider

Peter Prints - Pumpkin Spider A1 Mini Color.3mf

-------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------

_Thank you for visiting my page! If you can, please consider supporting my art with a [subscription](https://than.gs/u/1514642?plans=true). Members will unlock ALL of my designs as well as the commercial rights to sell physical prints for as long as they are members._

_I also invite you to join my Discord channel, whether you're a reseller or a fan. You'll find a dedicated space where you can communicate directly with me and other members:
https://discord.gg/pUW67mEFrb

-------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------

ID: 19mm  

Composed of three shells that wrap around the finger, the ring features two eyelids that close around a central sphere with eerie irises. A surreal and captivating design, perfect for those seeking a sinister and exclusive touch. Now available on Thangs

-------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------

**REMEMBER THAT ALL MY FILES ARE PROTECTED BY A CC LICENSE AND ARE NOT INTENDED FOR COMMERCIAL PURPOSES UNLESS YOU HAVE [SUBSCRIBED TO A MEMBERSHIP PLAN ON THANGS](https://than.gs/u/1514642?plans=true) - IF YOU USE MY 3D FILES FOR COMMERCIAL PURPOSES, YOU HARM MY WORK AND MY COLLABORATORS - DON'T DO IT!**

-------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------

_How do I take such high-quality photographs?
Here's my equipment:_

_Camera: https://amzn.to/3RPDj2c_
_Lightbox: https://amzn.to/4btNvV0_
_Tripod: https://amzn.to/3L51fuT_

Mechanical Creepy Eye-Ball Ring 

b.stl

Meet Bubzee, the ultimate demon skull with horns that brings a mix of creepy and cool to your 3D prints! Whether you’re decorating for Halloween, adding to your skull collection, or just want a wicked model for your next print, Bubzee has you covered.

With its twisted horns and detailed skull features, Bubzee is perfect for anyone looking to add some edge to their space. Print it as a terrifying centerpiece or as part of your spooky decor – Bubzee is ready to haunt your next project!

Download and 3D print your own Bubzee, and bring a touch of demonic style to your creations!
---
Original design created in Nomad Sculpt and named by the community. "Bubzee" is a simple four piece print. I've broken the 3mf builds into 3 plates. 
1. Plate 1 is a door knocker configuration with the option to print the back of the skull separately. 
2. Plate 2 is a "Minimal" supports option for cleaner teeth but will result in surface artifacts when printed. 
3. Plate 3 is for the gamblers an will potentially result in supports around the teeth.

BUBZEE - The Daemon 

Gargoyle Knocker - Final.stl

Meet Lilith, a lovable bat with tiny wings and a sweet expression that make her a charming companion, whether she's sitting on your shelf as a decorative figure or being used as a cute, playful toy. Lilith also makes the a cute keychain, adding a touch of cuteness to your bag or keys wherever you go! 

PRINTING SETTINGS
-Printed with 0.16 mm layer height.
-10 % infill Gyroid
-Supports are needed for the wings

Cute Bat 

Cute bat.stl

Say hello to our cute little grim reaper!
It may seem harmless but don’t be fooled by its cuteness, this reaper is still on duty! 💀

Cute Grim Reaper (Knitted)

Crochet reaper.stl

Enhance your home and interior design aesthetic with our exclusive 3D model of the Raven, available for free this Halloween at thangs.com. As one of our top-tier designs, this carefully crafted model takes design inspiration from Huginn and Muninn, the legendary Norse mythological ravens. Our Raven model includes both an STL file and a pre-painted Bambu 3MF, providing versatility and convenience for all your designing needs. A must-have for all Halloween enthusiasts and interior design lovers, this 3D model adds a unique touch to any space. 
**Don't forget to like the model if to like the model if you download it, as this gesture of appreciation truly supports our creative process.**
Check out the detailed images to visualize how this stunning model will elevate your design project. Get your hands on this free Raven model now and give your space a dash of Halloween spirit.

The Raven **Free Through Halloween!!!** Huginn and Muninn with AMS File

Raven v1.stl

Check out the Mummy’s Head Candy Basket – a cool and spooky way to hold your Halloween treats! Shaped like a mummy’s head with wrapped-up bandages, this basket is perfect for trick-or-treating or just putting on display at your party. 

You can use it with or without a handle, so it's easy to carry or set out as a candy bowl. It’s a fun, creepy decoration that’s both useful and awesome for the Halloween season. You can even make it glow in the dark for an extra spooky vibe!

Mummy's Head Candy Bucket

Mummy Candy Bucket.3mf

Meet the Halloween Skeleton Turtle! It's a cute turtle that looks like a skeleton. It prints in two parts that you clip together. The .3mf file has the paint job for the eyes and face, so your turtle looks great! It's perfect for Halloween fun. You can play with it or use it as a decoration.

🎁 Free STL Alert: Join our Discord community today and be one of the first 100 members to get exclusive premium STLs from our portfolio absolutely free!

🔗 Join the conversation and discover more: https://discord.gg/WJeu2fFRTQ

🔔 Follow for updates: Don’t miss our weekly drops of original 3D-printable designs.

3D Printing Settings:

Layer Height: 0.2 mm
Nozzle Size: 0.4 mm
Use normal settings

Halloween Skeleton Turtle - A Spooky and Fun Toy

BODY.stl

**Pepkin the Pumpkin Bowl** is a delightful and functional 3D model, perfect for adding a touch of autumn charm to your home. Whether you're using it for Halloween candy, fall decorations, or as a unique centerpiece, this pumpkin-shaped bowl brings both fun and practicality to the season.

**Key Features:**

- No Supports Required:
Designed for an easy, hassle-free printing experience with no supports needed.

- Available in Multi-Color:
Customize your bowl with multi-color printing options, adding even more personality to your project.

- Scalable Design:
Easily resize the model to suit your needs—whether it’s a small dish for snacks or a large bowl for parties, it prints beautifully at any size.

- Perfect for Halloween and Fall:
Ideal for holding candy, fall trinkets, or even as a centerpiece for your autumn gatherings.

- Detailed Yet Easy to Print:
Features smooth curves and pumpkin details that make for a visually appealing print while remaining easy to execute.

Add a festive touch to your décor this season with Pepkin the Pumpkin Bowl, and bring a bit of Halloween and fall magic to your home!

Pepkin the Pumpkin Bowl

Cute_Pumpkin_Bowl.stl

Pepkin Bowl - Multi-Color.3mf

Prints with NO supports or assembly!

All Kekreations designs are under Copyright and you may NOT sell any digital files or prints of my designs. 

If you are interested in obtaining the rights to sell commercially, you can join the Thangs Membership!

Check out my socials to keep up with other designs in the works!
[Instagram](https://www.instagram.com/kekreationsart/)
[Tiktok](https://www.tiktok.com/@kekreationsart)
[Facebook](https://www.facebook.com/kekreationsart)
[Youtube](https://www.youtube.com/channel/UCz5aaSy-DlRZ7P6W_7WUVxg)

Feel free to tag me or DM me on any socials if you post photos, I would love to see them! <3


Flexi Gargoyle

repaired_gargoyle-4 (3).stl

Flexi gargoyle.stl

Halloween

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

curiojunkie

Achievements

Rising Star

Voyager

Amateur Maker