Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #e6dddb PLA PolyTerra Cotton White Transmission Distance: 2.5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #0e2070 PLA Chrominal Deep Sea Blue Transmission Distance: 8 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Cotton White At layer #11 (0.96mm) swap to Yellow At layer #15 (1.28mm) swap to Deep Sea Blue for the rest.