Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5820814.

Here are some collars for your Yakgear parking pole that will keep your rope from sliding up and down the pole, watch the video for instructions on how to use them..
https://www.youtube.com/watch?v=80RvurEKz3c&t=37s

YakGear stake out pole Collars.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5754101.

Needed a stopper for the sink, measured it, designed it and printed this, your dimensions may vary but you can resize it in your slicer, Don't have pics of the actual print because it is in use right now thawing chicken wings but happy to say it works....    

Sink Stopper

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4113981.

Printed this on the Elegoo Mars, .05 layer, it's very thin so only cure it for about 5 min. 

Great White Lithophane

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4166942.

Drinks on Me... Keep your resolution at .1 or .12 to stop seepage.

Revolver Shot Cup

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5735236.

The Wife is giving Books for Christmas Presents, So I'm Making some Bookmarkers to go with them.

Oreo Bookmark

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4207794.

Made this to fit 20mm extruded top rail on 3D printers, orient the print just as i have it and you will only need supports for the part that slides into the rail. 

Ender 3 Gopro Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4151990.

Got the idea from @Elproducts, designed in Tinkercad. https://www.thingiverse.com/Elproducts

CAPT calibration cube

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4153481.

Made this so i could mount the power supply on the wall behind the printer. Lay it on it's side to avoid supports, duplicate bracket because you will need two.

Kingroon KP3 power supply bracket 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4188926.

Needed a Headphone holder that would mount under a shelf or work bench, so i designed this one, enjoy

Headphone Hanger 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4396359.

I could not find a handle for the CR-10 mini so i made this one, Print it just the way it is. Enjoy

CR-10 mini handle with gopro mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4163174.

Valentine Heart For Your Sweetheart, Print at .01 for better results,Size it as you wish..

Valentine Heart with Rose

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4165109.

1911 Plaque,will need support in the mounting holes, enjoy!!

Colt 1911-A1 Plaque

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5726545.

Here Is a Anchor bookmark to help hold your place.

Anchor Bookmark

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5697311.

Here is a fish cookie cutter.

Fish Cookie Cutter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5575117.

These are 1.5"spacers for the Wilderness Systems Kayak cart just in case you want to install balloon tires on your cart because they are rubbing your yak. These things list for $70 to &80 online and I wasn't paying it. You will need (4) 5/16"x 5" SS bolts and wing nuts to replace the old ones. These are prototypes and work well but I do 
HIGHLY recommend Printing these in ABS because of the Instability of PLA. 

Wilderness Systems Cart Spacer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5716087.

Just a little Ornament for you Tarheel Fans...
Printed on the Ender 3 V2 Neo.

Tarheel Christmas Ornament 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5641744.

This is a Stake-Out-Pole mount that I designed to fit my Old Town Sportsman 106 MK.
As you can see from the pics you can attach it to your accessory rail so this should fit most kayaks. Print with PETG or ABS and I wouldn't drop the infill below 75% it's really better to do 100% but that really depends on how much current you are dealing with.
I have tested this and it works but I fish in salt water close to inlets so a lot of stress is put on my accessory rail. IMHO I think it would be better suited for calmer waters but that's your call.. 

Stake-Out-Stick Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5697446.

Here is a Star fish Cookie Cutter for all you ocean lovers...
Printed with the Ender 3 V2 Neo

Star Fish Cookie Cutter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4153560.

Designed this .40 cal snapcap just because i don't have any and why spend the money to buy them when i can make them, tried them in my Beretta 96 and they work great.
Make sure you position it so the primer end is on the build plate. 

UPDATE: Shortened it up by 2mm

.40 cal. Snap Cap

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5738455.

Here is a Booksharker..

Shark Bookmarker

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5726940.

Another bookmark, Just stab It in between the pages...

Dagger Bookmark

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5769735.

Here is a card holder for all you duck hunters out there. Print this with the hunter and dog flat on the bed, you will need some support under the ledge.

Duck Hunter Business Card Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5697497.

A Silhouette of on of my favorite fish..

Black Drum Silhouette

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5753734.

Thresher Shark Keyring 

Thresher Shark KeyRing

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

captcookk

Achievements

Trailblazer

Seedling

Debutant