**Do you want to build a Snowman?!?!?**

This model was designed  to be remixed this into a finished snowman or something else.

This Snowman has a planetary gear on the bottom! When you hold the center ball and spin the bottom ball its head rotates at 3 times the speed.  If you hold the head and spin the bottom four times, it will only rotate the center once. 

It is 133mm tall 100% and does not require supports. I used a .4mm nozzle at .2mm layer heights but a bigger nozzle or layers should work. If you scale it down it will make it more difficult to print but scaling it up will actually make it easier. I think it will scale up to at least 200% if not more without issue. 

Its hollow to save material so be sure not to add any details that extend too far into the inside as it could mess us the mechanics or create a part that needs supports. 

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer.

___
**Support and Licensing**
If you would like to help support more free models, or gain permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)

Planetary Snowman

Build your own Planetary Snowman

This Snowman has a planetary gear on the bottom so when you hold the center ball and spin the bottom ball his head rotates at 4 times the speed.  If you hold the center ball and spin the head, the bottom will rotate at 3 times slower. If you hold it by the head and spin the bottom or middle ball, it will spin freely, like a bearing. 

It is 133mm tall 100% and does not require supports. I used a .4mm nozzle at .2mm layer heights but a bigger nozzle or layers should work. If you scale it down it will make it more difficult to print but scaling it up will actually make it easier. I think it will scale up to at least 200% if not more without issue. 

Its hollow to save material, be sure not to add any details that extend to far into the inside as it could mess us the mechanics or create a part that should have supports. 


Remix of Planetary Snowman by 3dprintingworld

Print it without supports 

Also you can print every other part and glue it to the planetary body

User color change for the hat

Remix of Planetary Snowman

calebtimoteo

Remixes

Original

Community Uploads

Remixes

Original

Community Uploads

Geometrically Related to Remix of Planetary Snowman

T-27 Tucano Embraer 200 mm

PORTA CANETAS.SLDPRT

Articulated Snowman

Mrs. Claus (Island of Misfit Toys)

Perceptor

Lion (NT Animals)

White Widow - a Light Up Head Mounted Animatronic Spider

Aztec (not so) death whistle

Von Kármán Haack Series Nose Cone

Snowman finger up

Mobile Apps Design.obj

Remix of Planetary Snowman (Superhero)

Remixes

Original

Community Uploads

Remixes

Original

Community Uploads