Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3196707.

Updated all files for screw drivers and two different tolerance sizes 


Updated the files after scaling them a few times 

here is the fusion link if you want to see my source 
https://a360.co/3rqHTo3

...


I can't find  a wrench organizer to hold all of my wrenches the way I want them in my tool box so here is my take on it 

pop a 8x3mm magnet in the bottom and they will stay where you put them in the drawer 

print as many as you need and snap them together 

I'm printing this now I will probably update this with images and changes as I test them out

Update 1:
Well first print looks ok  the crapy petg didn't help as well as I forgot the horizontal size compensation was on from my last print.  Will print again  it is however a quick print  
15% infill seems plenty and I may make them a touch taller

update 2 
new file uploaded minor dimensioning issue fixed 

modular wrench holder 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:226440.

this x carriage has a magnetic probe mount modified from nopheads magnet probe   
http://www.thingiverse.com/thing:7550  
for almost automatic bed levelling that doesn't require a servo   
so those of use with sanguinololu boards can have auto bed levelling with out the need to buy a ramps and a servo   

auto bed levelling requires a atmega 1284  and a lcd control makes things better  (likely not doable with out it )

this is still a work in progress as I haven't mounted the current version to my printer yet to test  

edit mounted and tested tonight works quite nice   
hope you guys can make good use of it   

edit: added clamps for the belt sorry I forgot them

Edit: after a year of use the original is still mounted and working very nicely 
I would say likely the single best upgrade to my prusa has literally turned this machine into a reliable machine 
-insert sd card
-pick file 
-lower probe 
-push the button
-wait for print to complete 

instead of the 
-level it 
-level it again 
-hope its ok 
-start print 
-stop print 
-level it 
-start again 


prusa x carriage with auto leveling probe

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4849641.

this is a simple switch Bezel to hold one or 2 wall switches for low voltage lights in a RV

fits 1 or 2 of these standard 
rocker switches
https://www.digikey.ca/en/products/detail/cw-industries/GRS-2011-2055/4425742

Version one is a simpler base 
Version 2 is filleted on the outside 
and tappered on the inside to use less plastic and time also gives you a bit more room around the switches 

RV Switch Bezel 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4751865.

I wanted to make a cyclone dust separator for my shop vac on a bucket I didn't like most of the solutions I found online but after looking at alot of the DIY ones both here and everywhere else 

I decided to make some simple flanges to connect to the bucket lid and adapt to sch40 pvc or abs pipe 

I choose to use pip fitting inside the bucket because I had them so why print parts when I have smoother more effective parts already 

but its very simple I made separate flanges at first but I could not fit them on the bucket lid so I combined them in one 

I have added all 3 files here so you can use them on any size bucket you want 

the larger one is fits a standard shop vac hose the larger end that typically goes into the vacuum and the smaller end fits the opposite end of the shop vac hose 

this way I was able to use standard hoses I had already and the would be able to directly connect to my Vacuum with out the cyclone if need be 



Vacuum to pvc/abs flanges 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

broncosis

Achievements

Seedling

modular wrench holder

prusa x carriage with auto leveling probe

RV Switch Bezel

Vacuum to pvc/abs flanges