tracking pixel
braga3d p

Nezuko Demon Slayer Lightbox LED Lamp

by
braga3dprint
Follow
Follow
Remix Model
braga3dprint
braga3dprint
|
Image 2 of 4
Nezuko Demon Slayer Lightbox LED Lamp 3d model
braga3dprint
braga3dprint
|
Image 2 of 4
Nezuko Demon Slayer Lightbox LED Lamp 3d model
2D
3D
Makes
Nezuko Demon Slayer Lightbox LED Lamp 3d model
Nezuko Demon Slayer Lightbox LED Lamp 3d model
Nezuko Demon Slayer Lightbox LED Lamp 3d model
Nezuko Demon Slayer Lightbox LED Lamp 3d model
This model is restricted by licensing terms. 

Bring the enchanting spirit of Nezuko from "Demon Slayer" into your space with this beautifully designed lightbox. Featuring intricate details that capture her iconic look, this lightbox is perfect for fans of the anime. Whether displayed in a bedroom, gaming setup, or as part of a collection, it radiates a warm glow that adds a touch of magic to any environment. Illuminate your love for Nezuko and showcase your fandom with this stunning piece that is sure to be a conversation starter!

If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

WARNING!

  • remove purge line at the beginning of the print, it may interfere, specially with bigger prints!

Materials and tools:

  • glue gun
  • aluminum tape
  • led strip: simple 1m or 2m white or rgb led USB (recommended 60 LED per meter)
  • soldering iron (optional)

RECOMMENDATIONS

  • use a textured PEI sheet

  • remove purge line at the beginning of the print!

  • use the print profile, it has quite a few setting changes that help achieve the best results

  • make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

  • use the aluminum tape on the inside of the backplate to help with light diffusion

  • glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend:

  • preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08
  • Quality → Wall generator → Arachne
  • Quality → Wall transitioning threshold angle → 30º to 50º
  • Strength → Advanced → Infill/wall overlap → 20% to 25%
  • Increasing retraction / reducing temperature can help reducing wisps
  • Order color printing from lightest to darkest color

How to make a hole in Bambu Studio: https://www.youtube.com/watch?v=OsA23WCxRtg&t=14s&ab_channel=braga3dprint

Assembly video: https://www.youtube.com/watch?v=QNsShLmXYh0&t=8s&ab_channel=braga3dprint

How to print without AMS: https://www.youtube.com/watch?v=RUSTGxOOS_U&t=4s&ab_channel=braga3dprint


1 Likes0 DownloadsNovember 1, 2024


1 Likes0 DownloadsNovember 1, 2024
This model is restricted by licensing terms.