tracking pixel
braga3d p

A&W Root Beer Lightbox LED Lamp

by
braga3dprint
Follow
Follow
Remix Model
braga3dprint
braga3dprint
|
Image 3 of 3
A&W Root Beer Lightbox LED Lamp 3d model
braga3dprint
braga3dprint
|
Image 3 of 3
A&W Root Beer Lightbox LED Lamp 3d model
2D
3D
Makes
A&W Root Beer Lightbox LED Lamp 3d model
A&W Root Beer Lightbox LED Lamp 3d model
A&W Root Beer Lightbox LED Lamp 3d model
This model is restricted by licensing terms. 

Celebrate the nostalgic charm of A&W Root Beer with this eye-catching lightbox featuring the iconic logo. Perfect for fans of this classic beverage, the design captures the essence of the A&W brand, making it an excellent addition to any kitchen, bar, or themed decor. The warm glow from the lightbox enhances the retro feel, creating a cozy ambiance that brings back memories of enjoying root beer floats. Illuminate your space with this unique piece that showcases your love for A&W and its deliciously refreshing flavors!

If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

WARNING!

  • remove purge line at the beginning of the print, it may interfere, specially with bigger prints!

Materials and tools:

  • glue gun
  • aluminum tape
  • led strip: simple 1m or 2m white or rgb led USB (recommended 60 LED per meter)
  • soldering iron (optional)

RECOMMENDATIONS

  • use a textured PEI sheet

  • remove purge line at the beginning of the print!

  • use the print profile, it has quite a few setting changes that help achieve the best results

  • make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

  • use the aluminum tape on the inside of the backplate to help with light diffusion

  • glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend:

  • preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08
  • Quality → Wall generator → Arachne
  • Quality → Wall transitioning threshold angle → 30º to 50º
  • Strength → Advanced → Infill/wall overlap → 20% to 25%
  • Increasing retraction / reducing temperature can help reducing wisps
  • Order color printing from lightest to darkest color

How to make a hole in Bambu Studio: https://www.youtube.com/watch?v=OsA23WCxRtg&t=14s&ab_channel=braga3dprint

Assembly video: https://www.youtube.com/watch?v=QNsShLmXYh0&t=8s&ab_channel=braga3dprint

How to print without AMS: https://www.youtube.com/watch?v=RUSTGxOOS_U&t=4s&ab_channel=braga3dprint


1 Likes0 DownloadsNovember 1, 2024


1 Likes0 DownloadsNovember 1, 2024
This model is restricted by licensing terms.