This 3D printable geometric soap holder features a unique design with cubes or square shapes. It comes in two versions: one with holes for drainage and one without holes. The drainage version is sloped to allow water to flow out easily. Printed using Winkle PLA HD Desert Sand and Spectrum PLA Pastello Cocktail Green, this stylish soap holder adds a modern touch to your bathroom decor.

Soap Holder Cubic

soap holder cubic with holes.step

Illuminate your space with nostalgia and innovation using this 3D printable lightbox featuring the iconic Kodak logo. Perfect for photography enthusiasts or as a retro-inspired decor piece, this model adds a touch of vintage charm to any room. Print with ease and showcase the timeless legacy of Kodak in your home or office.

If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

WARNING!

- remove purge line at the beginning of the print, it may interfere, specially with bigger prints!






Materials and tools:
- glue gun
- aluminum tape
- led strip: simple 1m or 2m white or rgb led USB (recommended 60 LED per meter)
- soldering iron (optional)



RECOMMENDATIONS

- use a textured PEI sheet
- remove purge line at the beginning of the print!
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 30º to 50º
- Strength → Advanced → Infill/wall overlap → 20% to 25%
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color


How to make a hole in Bambu Studio:
https://www.youtube.com/watch?v=OsA23WCxRtg&t=14s&ab_channel=braga3dprint




Assembly video:
https://www.youtube.com/watch?v=QNsShLmXYh0&t=8s&ab_channel=braga3dprint




How to print without AMS:
https://www.youtube.com/watch?v=RUSTGxOOS_U&t=4s&ab_channel=braga3dprint


Kodak Lightbox LED Lamp

LED_kodak_ams_ready.3mf

Rev up the excitement with this sleek 3D printable lightbox showcasing the iconic Porsche car brand. Whether printing just the Porsche logo or the base with a customizable name in Fusion 360 (free for personal use), this model offers versatility and style. Simply open the .f3d file and follow the step-by-step instructions provided in the accompanying YouTube video. Elevate your space with the timeless elegance of Porsche.

How to change Name:
https://www.youtube.com/watch?v=MC7ybI3dqj4

If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

WARNING!

- remove purge line at the beginning of the print, it may interfere, specially with bigger prints!






Materials and tools:
- glue gun
- aluminum tape
- led strip: simple 1m or 2m white or rgb led USB (recommended 60 LED per meter)
- soldering iron (optional)



RECOMMENDATIONS

- use a textured PEI sheet
- remove purge line at the beginning of the print!
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 30º to 50º
- Strength → Advanced → Infill/wall overlap → 20% to 25%
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color


How to make a hole in Bambu Studio:
https://www.youtube.com/watch?v=OsA23WCxRtg&t=14s&ab_channel=braga3dprint




Assembly video:
https://www.youtube.com/watch?v=QNsShLmXYh0&t=8s&ab_channel=braga3dprint




How to print without AMS:
https://www.youtube.com/watch?v=RUSTGxOOS_U&t=4s&ab_channel=braga3dprint


Porsche Customizable Lightbox LED Lamp

LED_porsche_customizable_name_ams_ready.3mf

Unleash the power of the Incredible Hulk with this striking 3D printable lightbox featuring the Marvel superhero. Choose to print just the Hulk or the base, which includes a customizable name option in Fusion 360 (free for personal use). Simply open the .f3d file and follow the step-by-step instructions provided in the accompanying YouTube video. Bring the strength and fury of the Hulk into your space with this impressive lightbox.

How to change Name:
https://www.youtube.com/watch?v=MC7ybI3dqj4

If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

WARNING!

- remove purge line at the beginning of the print, it may interfere, specially with bigger prints!






Materials and tools:
- glue gun
- aluminum tape
- led strip (here is the one I use): simple 1m white led USB

- soldering iron (optional)



RECOMMENDATIONS

- use a textured PEI sheet
- remove purge line at the beginning of the print!
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 30º to 50º
- Strength → Advanced → Infill/wall overlap → 20% to 25%
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color


How to make a hole in Bambu Studio:
https://www.youtube.com/watch?v=OsA23WCxRtg&t=14s&ab_channel=braga3dprint




Assembly video:
https://www.youtube.com/watch?v=QNsShLmXYh0&t=8s&ab_channel=braga3dprint




How to print without AMS:
https://www.youtube.com/watch?v=RUSTGxOOS_U&t=4s&ab_channel=braga3dprint


The Hulk Customizable Name Lightbox LED Lamp

LED_hulk_customizable_ams_ready_private.3mf

Looking for a captivating 3D print model that represents the deep connection between a mother and daughter? Our Mother and Daughter Holding Hands 3D model is the perfect piece to print and cherish. This sentimental 3D model, available on thangs.com, captures the intimate moment between mom and child, displaying them hand-in-hand – a perfect embodiment of their unbreakable of their unbreakable bond.

This 3D print model can be an ideal Mother’s Day gift and is designed by the renowned 3D print model designer, Braga. The model is specifically designed for optimal convenience; a quick print that captures the essence of motherhood in a tangible form.

Press firmly on the feet of the 3D model for a snug fit, and see how this touching piece of art springs to life. The model, categorized under '3D Printers/All', stands as a symbolic representation of the beautiful bond of love and affection that binds a mother and her child.

From craft enthusiasts to those interested in 3D printing, this model is perfect for everyone who wishes to celebrate the extraordinary relationship between a mother and child. This model serves as the perfect way to inspect, print, and celebrate that special connection. Experience the joy of 3D printing with this beautiful Mother and Daughter Holding Hands model at thangs.com.

Mother and Daughter Holding Hands Art

mom_play_w_daughter.step

Elevate your Mother's Day celebration with this customizable 3D-printable lightbox featuring the heartfelt message 'Happy Mother's Day.' Each component is separate, allowing you to freely color it to your liking in the slicer. The border, stars, hearts, and text can all be set to different colors, encouraging creativity and personalization. Perfect for honoring moms in a unique and meaningful way, this lightbox adds a special touch to any Mother's Day decor. Let your imagination soar and create a one-of-a-kind tribute to the special moms in your life.



If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

WARNING!

- remove purge line at the beginning of the print, it may interfere, specially with bigger prints!






Materials and tools:
- glue gun
- aluminum tape
- led strip (here is the one I use): simple 1m white led USB

- soldering iron (optional)



RECOMMENDATIONS

- use a textured PEI sheet
- remove purge line at the beginning of the print!
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 30º to 50º
- Strength → Advanced → Infill/wall overlap → 20% to 25%
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color


How to make a hole in Bambu Studio:
https://www.youtube.com/watch?v=OsA23WCxRtg&t=14s&ab_channel=braga3dprint




Assembly video:
https://www.youtube.com/watch?v=QNsShLmXYh0&t=8s&ab_channel=braga3dprint




How to print without AMS:
https://www.youtube.com/watch?v=RUSTGxOOS_U&t=4s&ab_channel=braga3dprint


Happy Mother's Day Lightbox LED Lamp

LED_happy_mothers_day_ams_ready.3mf

With this tier, you'll receive access to exclusive models created by braga3dprint.

Designed as a special opportunity for our loyal subscribers from the Printables Club and Patreon to transition to Thangs. Limited to 60 members.

- unlimited premium model downloads per month
- commercial license to print and sell and downloads available in membership
- braga3dprint’s endless appreciation for your support

_*The is a license to print and sell the physical product. The digital files are NEVER for resale or sharing._

Boundless Tier

With this tier, you'll receive access to exclusive models created by braga3dprint.
- 20 premium model downloads per month
- commercial license to print and sell and downloads available in membership
- braga3dprint’s endless appreciation for your support

_*The is a license to print and sell the physical product. The digital files are NEVER for resale or sharing._

Maverick Tier

With this tier, you'll receive access to exclusive models created by braga3dprint.
- 10 premium model downloads per month
- commercial license to print and sell and downloads available in membership
- braga3dprint’s endless appreciation for your support

_*The is a license to print and sell the physical product. The digital files are NEVER for resale or sharing._

Explorer Tier

Hi, I'm braga3dprint, a 3D printing afficionado. I hope you find something that you like, and happy printing!

If you'd like a commission, send me an email and include info such as picture, theme, etc:
braga3dprint@gmail.com

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

braga3dprint

Achievements

Debutant