This parametric model can generate shelves with Multipoint rails on the back. You can attach it to the tiles using Multipoints or bolt-locks snap-ins (see picture).

I've included Fusion 360 parametric file. A brief explanation of the most significative parameters:

- **Width** - The internal width of the shelf. The number of multipoint rails will be calculated based on this parameters. If you set this larger than 300mm you'll need to adjust the Combine1 step as well.
- **Depth** - The internal depth of the shelf.
- **Num_cells_back_height** - The height of the back wall of the shelf, where the rails are. This is in multiples of Multiboard cell size, which is 25mm, plus +- 5mm.
- **Front_height** - The height of the front wall of the shelf.

Besides the parametric file, I've included some ready-to-print STLs as well.

License: https://www.multiboard.io/license

Multiboard - Shelf Generator

10x10.stl

This was heavily inspired by this great design: https://makerworld.com/en/models/216791#profileId-239679

I did this remix because the original uses push fit connectors or front connectors for dual or quad offset snaps (those last two demand supports for printing). This version uses bolt-locked connectors which I think are easier to install than the snaps versions and guarantee a more stable connection than the push fit original version.

It prints without supports in the provided positions.

V2: Added a small recess at the bottom of the holes to make it easier to screw in the bolts.

License: https://www.multiboard.io/license

Multiboard - Bolt-locked Spool Holder

Spool Left.stl

This a remix of this great design: https://www.printables.com/model/859943-multiboard-parametric-bottle-holders

I did this remix because the original one uses pegboard click mounts which demands supports for printing. This version uses Multipoint rails, so it can be printed without supports in the provided position.

I've included Fusion 360 parametric files in two versions: one for large bottles (uses two rails on the back) and other for small bottles (uses a single rail). One of the parameters controls the bottle size (named "BottleSize") and the other controls the height of the part (named "HolderHeight"). I do not recommend lowering that last parameter too much or you'll break the model. I've also included two STLs, one for 90 mm diameter bottles (two rails) and another for 45 mm bottles (single rail).

When mounting the single rail version on Multiboard tiles, I recommend using two consecutive Multipoints vertically to avoid the holder spinning.

License: https://www.multiboard.io/license

Multiboard - Parametric Bottle Holder

Bottle Holder 90mm.stl

This two-part holder uses bolt-locked connectors for attaching to Multiboard tiles. I recommend using a Heavy Weight Bearing Hook Snap on the top connector.

It prints without supports in the provided positions.

V2: Added a small recess at the bottom of the holes to make it easier to screw in the bolts.

License: https://www.multiboard.io/license

Multiboard - Bolt-locked Paper Towel Holder

Left.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

bpitanga

Achievements

Voyager

Seedling

Up and Coming

Multiboard - Shelf Generator

Multiboard - Bolt-locked Spool Holder

Multiboard - Parametric Bottle Holder

Multiboard - Bolt-locked Paper Towel Holder