Step into a new realm of RV living with this updated screen door handle, where my over-engineered futuristic design meets unmatched durability. Unlike weaker 3D models that replicate injection-molded designs, this handle offers superior sturdiness. It securely attaches with an M4 screw that penetrates all the way through the aluminum frame and locks with a nut for better alignment and permanence.

Installation is easy—just reuse the spring from your current kit, drill the hole through, and install it using two M4 hex head socket screws with washers and nuts. My door latch kit includes 1 left-hand latch & body, 1 rectangular plate, and 1 square latch. This model isn’t just a replacement; it’s a significant upgrade, providing a secure, sturdy grip and a sleek look you can print yourself.

- Designed for left handle door
- Print using PETG filament for its superior strength, durability, and heat resistance
- Configure your slicer to use only vertical shell perimeters for better durability
- Requires M4 hex head socket screws, minimum length 30mm (check your door for exact length), with corresponding nuts and washers


Event Horizon QuantumShield RV Screen Door Handle

Event Horizon QuantumShield RV Screen Door Handle.3mf

Months in the making, these pegboard mounting kits are easy to print & install. Bonus: the screw caps make it easy on the eyes.

See how I build a Nerf Gun Rack with it: [https://www.youtube.com/watch?v=Khy3U6Nvc8U&lc](https://www.youtube.com/watch?v=Khy3U6Nvc8U&lc)


Pegboard Mounting Kit with Cover Screw Caps 

Cap.3mf

This depth meter uses a [low-cost generic calliper found on Amazon ](https://www.amazon.ca/gp/product/B0B2NL9863/) to ensure the accuracy of data up to 0.1mm/0.004’. The base is designed so it can stand on itself. You'll need two (2) M3 screws and bolts to attach everything together.


Saw Depth Gauge with Caliper for Router and Table Saw

Saw Depth Gauge.3mf

This build was about reducing the noise of high velocity air coming out from the back of the wet/dry vacuum. It’s a relative success as it did disperse the output without decreasing the vacuum drawing power.

https://www.youtube.com/watch?v=fCoNiRC0I6U&lc=UgzMsMe3_wV7-x7HpHF4AaABAg

“You can cry and I probably won’t hear you
Because it’s loud with the shop vac on” — Jonathan Coulton

Vacuum Diffuser With Scrubbing Sponges

Body.3mf

Every possibility is sleeping in any piece of wood. It depends on you, on how you look at it and what you see in it.

Some useless obstacle in my way can be removed with my orbit sander, but what about lighting my muscle in fire, so can take in my hands, and see the hidden life of the joy and pain of the mysteries of a piece of wood?

This 3D printed sander is using a 5″ sand disk I hooked up to my vacuum. Dust free, total control.

Buy a sanding disk pad from Milwaukee : https://geni.us/YBN4GP

Dustless Sander

3D Printed Dustless Sander

Contains 50+ pieces perfect as hanging ornaments on tree branches.

_Christmas is my favourite,
Filling my Amazon cart with gifts,
Christmas party cancelled there and here,
Bringing so much Christmas cheer.

But guys, just take it easy.
Eat treats and 3d print moderately.
For when Christmas is over,
You will find your spool empty!_

What's under (or on) the tree?

- One file with all the ornaments
- Or one file per ornament

You would like me to create another ornament? Use comment and I'll update it with your proposition. 👇

50+ Christmas Tree Ornaments ALL.3mf

Unique Piece

piece-002-50-christmas-tree-ornaments.3mf

piece-003-50-christmas-tree-ornaments.3mf

piece-004-50-christmas-tree-ornaments.3mf

piece-005-50-christmas-tree-ornaments.3mf

piece-006-50-christmas-tree-ornaments.3mf

piece-007-50-christmas-tree-ornaments.3mf

piece-008-50-christmas-tree-ornaments.3mf

piece-009-50-christmas-tree-ornaments.3mf

piece-010-50-christmas-tree-ornaments.3mf

piece-011-50-christmas-tree-ornaments.3mf

piece-012-50-christmas-tree-ornaments.3mf

piece-013-50-christmas-tree-ornaments.3mf

piece-014-50-christmas-tree-ornaments.3mf

piece-015-50-christmas-tree-ornaments.3mf

piece-016-50-christmas-tree-ornaments.3mf

piece-017-50-christmas-tree-ornaments.3mf

piece-018-50-christmas-tree-ornaments.3mf

piece-019-50-christmas-tree-ornaments.3mf

piece-020-50-christmas-tree-ornaments.3mf

piece-021-50-christmas-tree-ornaments.3mf

piece-022-50-christmas-tree-ornaments.3mf

piece-023-50-christmas-tree-ornaments.3mf

piece-024-50-christmas-tree-ornaments.3mf

piece-025-50-christmas-tree-ornaments.3mf

piece-026-50-christmas-tree-ornaments.3mf

piece-027-50-christmas-tree-ornaments.3mf

piece-028-50-christmas-tree-ornaments.3mf

piece-029-50-christmas-tree-ornaments.3mf

piece-030-50-christmas-tree-ornaments.3mf

piece-031-50-christmas-tree-ornaments.3mf

piece-032-50-christmas-tree-ornaments.3mf

piece-033-50-christmas-tree-ornaments.3mf

piece-034-50-christmas-tree-ornaments.3mf

piece-035-50-christmas-tree-ornaments.3mf

piece-036-50-christmas-tree-ornaments.3mf

piece-037-50-christmas-tree-ornaments.3mf

piece-038-50-christmas-tree-ornaments.3mf

piece-039-50-christmas-tree-ornaments.3mf

piece-040-50-christmas-tree-ornaments.3mf

piece-041-50-christmas-tree-ornaments.3mf

piece-042-50-christmas-tree-ornaments.3mf

piece-043-50-christmas-tree-ornaments.3mf

piece-044-50-christmas-tree-ornaments.3mf

piece-045-50-christmas-tree-ornaments.3mf

piece-046-50-christmas-tree-ornaments.3mf

piece-047-50-christmas-tree-ornaments.3mf

piece-048-50-christmas-tree-ornaments.3mf

piece-049-50-christmas-tree-ornaments.3mf

piece-050-50-christmas-tree-ornaments.3mf

piece-051-50-christmas-tree-ornaments.3mf

piece-052-50-christmas-tree-ornaments.3mf

piece-053-50-christmas-tree-ornaments.3mf

piece-054-50-christmas-tree-ornaments.3mf

piece-055-50-christmas-tree-ornaments.3mf

Build you own Softbox Light Kit with an aluminium reflector from an heat/clamp light and a studio umbrella to help focused light in area you need. You can screw in on top of a Tripod Ball Head with the 3/8" thread (bottom) or clip it on a Arca Swiss Stand Quick Release Plate.

You can buy a common clamp light with an 8.5 in aluminium reflector at your local hardware store. You also need a bulb and and studio umbrella.

Softbox Light Kit using a 8½" Heat Lamp Reflector

Build you own Softbox Light Kit with aluminium reflectors from two (2) heat/clamp light and a studio umbrella to help focused light in area you need. You can screw in on top of a Tripod Ball Head with the 3/8" thread (bottom) or clip it on a Arca Swiss Stand Quick Release Plate.

You can buy a common clamp light with an 8.5 in aluminium reflector at your local hardware store, or on Amazon.

You also need a bulb and and studio umbrella.


Softbox Light Kit Using Two (2) 5½" Heat Lamp Reflectors

Introducing my Cold Shoe Mount for Quad Lock® … it’s the fastest way to mount and secure a light or microphone to your Quad Lock® case.

You no longer need a phone clamp or a tripod to mount gear to your phone. Instead, I made the first mount that lets you securely connect your favorite cold shoe accessory directly to any Quad Lock® Case. Featuring a patented dual-stage Lock that's quick and easy to attach / detach, it's secured enough to put any big accessories.

The protruded design giving you extra space keeping your screen unobstructed.

Printed with PolyMax™ PETG, an advanced 3D printing filaments produced with Polymaker’s Nano-reinforcement technology, to deliver exceptional mechanical properties and printing quality.

Cold Shoe Mount for Quad Lock® iPhone Case

old Shoe Mount for Quad Lock® iPhone Case

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

bmeunier

Achievements

Seedling

Debutant

Explorer

RV