Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5168486.

Decorative stockings for the holidays! Quick and easy to print. Add your fiend's and family's names to make a great personalized gift! 

The *Christmas Stocking.stl* file includes a loop to hang the stocking using a string or metal ornament hanger. 

Christmas Stocking

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5139211.

Among Us Drink Coaster. Printed in PLA+ on my Creality Ender 5 Pro. Multiple colors achieved by printing in multiple passes with a Z-offset. 

The coaster is split into 5 parts, available in STL or 3MF format. The Coaster (or base) is printed first. The remaining parts are then printed in your desired colors with a 0.4mm Z-offset. 

Among Us Drink Coaster

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5100107.

A simple holder for common 3D Printing accessories. There are slots for four pens/markers, two rulers, pliers, an exacto knife, a glue stick, and super glue.

Tool Holder for 3D Printing Accessories

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4915611.

I like to use a standard 500mL water bottle when I am cycling, but the water bottle cage on my bicycle was designed for a slightly larger bottle. Occasionally the water bottle would shake loose and fall off the bike. It can be inconvenient and also hazardous if the bottle hits the rear tire. 

I designed this simple support to prevent a 500mL bottle from slipping through the back of the water bottle cage. On my bicycle, it fit snugly into the groove of the water bottle cage and fastens using the existing bolt. 

It should print fine in its default orientation, however I chose to lay the larger side flat on the printer bed. I printed mine in eSun PLA+ with 0.2mm layers and 15% infill. On an Ender 5 it took roughly 40 minutes to print. 

Bicycle Water Bottle Saver

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5237269.

This is a simple planter for succulents and other small plants. The slots along the bottom edge of each side allow excess water to drain. The inner dimensions are approximately 65x65x48 mm, but you should be able to scale the model to any desired size. 

Square Succulent Planter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5007976.

Designed to add extra support to your Motorcycle License Plate. Will help prevent bending and warping, especially if your bike only uses the top holes of the license plate. 

This original model is designed to fit Illinois Motorcycle License Plates. The "A", "B", and "C" models should fit license plates from a majority of US States. 

Motorcycle License Plate Support

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5320184.

This mount allows you to attach your Amazon Fire TV Stick to the back of your TV using its VESA mount interface. I used one 4mm-.70 x 20mm Flat Head Socket Screw to attach the mount to my TV. Depending on the size of your TV, a different screw may be required. 

I decided to create this mount because I attach my Fire Stick to the TV through an HDMI splitter. If you would like to connect your Fire Stick directly to your TV, you will need a longer male-to-female HDMI cable. 

I have included for M6 and M8 screws, but they have not been tested.

Amazon Fire TV Mount - Attaches to VESA Interface on TV

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5173882.

Simple and elegant business card holder. Emboss the name plate with your own name to make it yours!

Business Card Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5136308.

Uses a 8x3mm magnet to mount holder to a metal surface. The magnet will also hold your steel ruler in place. This simple holder will print in under 10 minutes!

NEW! The new 50mm wide version now has two magnets and to keep your ruler securely in place. It still prints in roughly 16 minutes and only uses 2 grams of filament! 

Magnetic Ruler Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5208824.

Carry your Barbeque Lighter in style with this tactical holster! 

Thanks to kdpainter for the belt attachment, borrowed from: https://www.thingiverse.com/thing:579672

Tactical BBQ Lighter Holster

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5237304.

This mount will allow you to attach a webcam to your pegboard wall. It is designed around the [Logitech C920](https://smile.amazon.com/gp/product/B006JH8T3S), although other cameras of the similar size should work. You will need a screw to attach your webcam to the mount. I purchased this assorted set of 1/4"-20 screws on Amazon [here](https://smile.amazon.com/gp/product/B01MS60KSY/). 

The updated version (v2) has more plastic connecting the pegs and should be less prone to breaking. I also tapered the bottom peg so that the camera will sit level. 

Webcam Pegboard Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4924982.

This battery cover was designed to replace the cover on an automatic card shuffler, but may work for other devices that use a similar battery cover (for 2x AA batteries). 

Print with 0.20mm layer height and supports. After printing, carefully remove the supports. A craft knife can be used to remove the supports without damaging the tabs. 

Battery Cover

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5260501.

This is a handy desk organizer to keep your office supplies in order. Prefect for paperclips, binder clips, pushpins, and any other pieces you want to keep organized. It can also hold 7 pens or markers. 

Handy Desk Organizer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4925021.

This Mattress Holder was designed to keep the mattress from sliding away from the wall by supporting the "foot" of the mattress.

Print with either 0.2mm or 0.28mm layer height and at least 15% infill for best results. 

This was designed to be compatible with the Amazon Basics Metal Platform Bed Frame (https://www.amazon.com/gp/product/B073WR5DGC/), however it may be compatible with similar style bed frames. 

Mattress Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5157464.

A simple water bottle cage designed to fit 500 mL water bottles. Created for the [Cyclace Stationary Exercise Bike](https://smile.amazon.com/dp/B07PMD1WG8).

This model is still a work in progress! If you do make it, please let me know how it works. 

Exercise Bike Water Bottle Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5167534.

I wanted to gift my friend a Gamefly subscription, but couldn't find any way to buy gift certificates. I designed this simple money holder so that I could gift him the cash! 

Gamefly Money Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5091396.

This is a simple pegboard hook. I have lengthened the hook to hold objects up to 3cm wide. 

Pegboard Hook (Larger)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4924985.

This Mattress Supporter was designed to keep the mattress in place and prevent it from sliding away from the wall. It hooks onto the metal bed frame and holds the mattress in place by supporting the "foot" of the mattress.

Print with either 0.2mm or 0.28mm layer height and at least 15% infill for best results.

This was designed to be compatible with the Amazon Basics Metal Platform Bed Frame (https://www.amazon.com/gp/product/B073WR5DGC/), however it may be compatible with similar style bed frames.

Mattress Supporter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5145521.

This is a holder for up to 7 bottles. It is scaled to hold 10mL bottles. 

Essential Oil Holder for 10mL bottles

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5174336.

Magnetic Charger Cable Holder. Designed for a 8x3mm magnet, will fit snuggly without any glue. 

Magnetic Charger Cable Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5171915.

Bottle Cap shaped coaster remixed from the Nukacola Bottlecap by Robert111512.

Bottle Cap Coaster

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

bmatic.xyz

Achievements

Novice Maker

Seedling

Debutant