This is:
- a drag chain mount
- an ADXL345 mount
- an optional Sherpa Mini mount

for the Two Trees Sapphire Plus v1.1

HotEnd cable management for the Two Trees Sapphire Plus v1.1

Plate

Anchor

Allows you to magnetically mount a double row of 8mm wide LED strips to your Two Trees Sapphire Plus printer's top frame, directly illuminating the bed.

BOM:
- 12 x 5x2.7mm magnets

Two Trees Sapphire Plus Magnetic LED strip mounting

Allows you to magnetically mount a double row of 8mm wide LED strips to your Two Trees Sapphire Plus printer's top frame, directly illuminating the bed.

This Carriage for the FLSUN QQ-S enables you to mount just about anything to the carriage, as the mounting holes are in the same configuration as in a linear rail's cart.

FLSUN QQ-S Modular carriage

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4888371.

This is a 92mm fan mod for the common Cheng Liang P360W24V power supply.

The assembly requires you to have the following items:

- 4x M4x30 or M4x40 (with spacer) flat head machine bolts
- 4x M4 washer
- 4X M4 nut
- 92mm fan
- optional mesh for 92mm fan

I didn't have M4x30 bolts on hand, so this is the reason for the spacer.

Cheng Liang P360W24V PSU 92mm fan mod

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4755903.

My wife got into number painting, and we've ordered a cheap Chinese wooden tripod as well, but we've found it's height lacking a bit for some of the canvas sizes... So FTIJPIT, 10 minutes in fusion, ~1.5h printing, and behold :)

Some info about the stand:
 - The center part is ~ 13.8 mm on the sides
 - The center part has been chamfered to be "flush" with the front legs when open

Paint Display Stand extension

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4682466.

Simple hooks for the top edge of plastic windows.

Window edge hook

Use the slicer to decrease the dimensions a bit if the tolerances are off.

Gauss Pistol

Pistol Body

Speaker Cap

12mm Button Captive Plate

22mm Button Captive Plate

Barrel Left

Barrel Right

Handle Right

Handle Left

Butt Plate

Decor Cap

FacePlate

Tigger Body

Diffusor

AntPoisonDispenser_v2.stl

Slug Buffet

cap.stl

If you want to move your PSU outside of the chassis, this stand might help you with that!
Originally intended for the PSU the FLSUN QQ-S comes with, but should fit similar PSUs with a 51x113mm profile.

FLSUN QQ-S PSU Stand

If you want to move your PSU outside of the chassis, this stand might help you with that!
Originally intended for the PSU the FLSUN QQ-S comes with, but should fit similary PSUs with a 51x113mm profile.

Dual extruder mounting arm for the FLSUN QQ-S

Cobra Arm

Dual extruder mounting arm for the FLSUN QQ-S with filament runout sensor mounting points

Cobra Arm With Filament Runout sensor mounting

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

blackfyre