Decorations for motorcycle helmet.
They can be easily be changed because they stick with a magnet on the helmet.

There are two options for models:
- Devil Horns
- Big yellow Eyes

For the models I used round magnets of dimensions 19x4mm.
For the helmet I used small Neodymium Magnets of power N40.

I sticked everything with an Epoxy Glue.



Helmet Decorations

Helmet Eye.step

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5213844.

This is a remake from the aerobatflyer upload with some slight modifications to lock it in place when it is inserted on the case.

MicroSD Card Wallet (Locks in place)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5245826.

# Inspiration
Suzuki Inazuma (GW250) doesn't provide with many options to mount the phone, so I decided to make my own. 

I needed one that was out of the road's line of sight and I could see the speed, RPM and have access to the key. 
I designed it specially for my Xiaomi Redmi Note 8 Pro with a thin case that I am using. It's a tight fit, so the phone feels really secure and I have access to the power and volume buttons.

# Piece all together
You will need some nuts a bolts. A long bolt to connect the Under and Upper, a smaller bolt for the Connector, and 2 smaller ones for the Phone case.
For more security, I glued the Connector with the Phone case with a hot glue.

# Final thoughts
I printed my own on PLA, but it is not recommended because it degrades really fast when it's outdoors. I would recommend PETG, but I don't have experience with this yet.

GW250 Phone Mount

Inazuma_Phone_Holder_Phone_v6.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4548732.

Attachment for a worm motor with a D Shaft with dimensions of 6mm diameter and 5.4mm until the D of the shaft.
It is used for attaching a key to make a smart lock.

SmartLock

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5274658.

I've searched on thingiverse for other designs, but they seemed really empty, so I designed my own with a face to give it more of a character.

This can hold 2 sets of keys at the bottom of the cloud.

I am using round magnets with a power of N40. 
The slot for the magnets is 14x2.8mm which is a bit bigger than my magnets, but I squished a piece of thick paper to stay in place.

Magnetic face cloud key holder

Cloud_magnetic_key_holder_v6.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5276100.

I bought my printer and when I saw the design by Jargs for covering the QR Code I was amazed, but I wanted to upgrade my printer to add a CR Touch. 

Once installed, I realized that the button for the X axis couldn't be pressed.
I modified the model and after 2 failed attempts, I managed to fit the CR Touch perfectly!
The BL Touch should also fit because it's smaller, but I haven't tested it.

I printed it on a Metalic Gray filament and the result is outstanding!
I am not a painter, so It took me around 2 hours to paint it with waterproof markers.


Ender 3 v2 Companion Cube X Motor Cover - CR Touch edition

x-axis-companioncube_v9.step

x-axis-companioncube v11.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5182250.

Tichu holder that fits cards with sleeves

Tichu Card Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5238700.

Designed for Xiaomi Redmi Note 8 Pro with a thin case.
A USB type C can be easily removed if needed.

Maximum supported dimensions: 79 x 11.5 mm

Mobile Wall Dock

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

bkbillybk