Concrete Wall Art Replica Mold.STL

Replica of Wall Art from this post: 

https://www.reddit.com/r/oddlysatisfying/comments/x9xwhb/concrete_wall_art_mold/

Concrete Wall Art Replica.STL

I modeled the drive bracket for the ALTO3, S3X1, and S3X2 units I have been selling on reddit. This is identical to the bracket they come with

Datto Drive Holder-Bracket

Datto-Drive-Bracket.STEP

Wall-mounted wine bottle holder
Print at least 6 wall layers and a hard material.

Wine Bottle Holder

2.5" Drive Bracket for DATTO MiniPCs

Datto-Drive-Bracket.STL

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3021838.

Phone dock for XZ1 with case. clamping it to something so you can put on and pull off with one hand. Dock is split in half to accommodate the cable, then the C-Clamp holds it together while the desk clamp holds the whole thing to the table. The cable is locked in place so it doesn't move when removing the phone from the charging dock.

The cable and cable head are exactly designed for the one I'm using. I have other cables that don't fit in this setup. 

The XZ1 model includes the Ringke case as pictured. It's a snug fit.



Sony Xperia XZ1 Charging Dock with clamp

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3321781.

I revised my previous design to accommodate using small screws and nuts instead of a printed wrap-around clamp to secure the front/back pieces together. Also switched around where the cable comes out so it's more out of sight.

If there's any interest, I can try modifying this design to be universal.

Sony Xperia XZ1 Charging Dock with clamp REVISED

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4616622.

Modified this to hold a female DC connector as well so I could use it for this project: https://github.com/fmalekpour/OctoPrint-Cooldownfan

Ultimaker 2 Raspberry Pi and Relay and DC Plug Support

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3424438.

Customized version of https://www.thingiverse.com/thing:62154

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=62154



My Customized Parametric screwdriver bit holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4536463.

Made holes larger and added counter bore for M3 nut so you can securely tighten fan.

UM2 Fan Duct Unsupported M3 Mod

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4146817.

Quite simply this allows you to mount the raspberry pi on the back of a monitor and still use the VESA holes for mounting the monitor. 

Raspberry Pi 3B spacer VESA 75mm

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4249517.

I previously made a dock for my Sony Xperia XZ1 in the same way.
(https://www.thingiverse.com/thing:3021838)

So I made one for my OnePlus 7Pro.
This dock fits with the phone and the clear case that comes with the phone.

Video:
https://www.reddit.com/r/functionalprint/comments/fqz8am/onehandedchargingdockforoneplus7procan_use/

You attach it to a table or any lip up to 44mm thick.
Sandwich the USB C cable between the two halves.
Install the heat set inserts into the Front piece.
Screw together.
Use the M8 nut and screw to tighten against the table.

I'm working on improvements.


2 x 4mm heatset inserts
2 x M4 x 20mm Screws
1 x M8 Nut
1 x M8 x 40mm

OnePlus 7Pro Dock

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4758939.

The Hinge design I've been using kept breaking, so I modified it to use M4 x 25mm screws for increased strength.

Hinge Remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3424182.

My dog destroyed the inductive charging cover for my plug-in charger for my Philips Sonicare toothbrush. 

I was able to get it to a height above the stand that seems to charge it properly.

Surprisingly the toothbrush still works. 

08/28/2019: Updated design

Charging Induction Cover/Stand for Sonicare DiamondClean Toothbrush Charger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3492878.

I took this great idea and made a keyring hole for attaching it more securely.
Also made the main body for coreless dog bag packs.

Dog Bag Holder Remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4616616.

Modified to just be a support for the Raspberry Pi if you simply want to have a spot for the Raspberry Pi and not mess with the power control of the UM2

Ultimaker 2 Raspberry Pi support

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4619222.

Great design by the OP.

I made this design half the thickness and added chamfers to two of the sides to direct some airflow.

LOUVERED FAN VENT 60MM - HALF THICK

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3433304.

I really liked this design and how this one utilized straight cuts of the plexiglass.

Only thing is I added this front stop so the enclosure could not be knocked backwards. 

Came out great.

Ultimaker Enclosure + secure stop

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3564848.

I'm working on taking a screen from a laptop and make a raspberry pi smart screen to put on my wall. 

I needed a way to hold it upright and demo what's going to be displayed at my desk.

This is designed for a 14" laptop screen. 

Tablet/Monitor Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4630990.

I just opened up the ventilation area more from the the original design.

Netgear GS108 Switch Vertical Stand w/ Ventilation Mod

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

bigrjsuto

Achievements

Seedling

Debutant

Explorer