Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4878871.

# About

This is a display piece for the album [Hawaii: Part II](https://miraclemusical.bandcamp.com/album/hawaii-part-ii) by [Miracle Musical](http://www.hawaiipartii.com/).

The stand in the preview images is [Challenge Coin Display Stand](https://www.thingiverse.com/thing:516444) scaled up 175%.

Please let me know if you have any issues with printing/assembling, I'd be happy to help :)

# Assembly

Each color is printed separately.

To assemble, each piece should slot in to the cutouts in the background piece, and then adhered with glue.

**NOTE:** Tolerances can be a bit tight, especially if you get any elephant's feet on the smaller pieces of the logo. I needed to print the Japanese text with rafts as I was having adhesion issues, and this also prevented major elephants feet issues.

# Colors

Below are the colors I designed the piece to be printed with:

* **Black**: `background.stl`, `octangula_inner.stl`
* **White**: `logo_top.stl`
* **Gray**: `octangula_frame.stl`
* **Red**: `logo_bottom_1.stl`
* **Orange**: `logo_bottom_2.stl`
* **Yellow**: `logo_bottom_3.stl`, `logo_bottom_4.stl`
* **Green**: `logo_bottom_5.stl`
* **Dark Green**: `logo_bottom_6.stl`
* **Blue**: `logo_bottom_7.stl`, `logo_bottom_8.stl`
* **Purple**: `logo_bottom_9.stl`
* **Pink**: `logo_bottom_10.stl`

Hawaii: Part II Disc Display

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4889827.

# About

This is a display piece of a drippy star for [SimpleFlips](https://www.youtube.com/SimpleFlips).

The stand in the preview images is [Challenge Coin Display Stand](https://www.thingiverse.com/thing:516444) scaled up 175%.

Please let me know if you have any issues with printing/assembling, I'd be happy to help :)

# Assembly

Each color is printed separately.

To assemble, each piece should slot in to the cutouts in the background piece, and then adhered with glue.

# Colors

Below are the colors I designed the piece to be printed with:

* **Black**: `background.stl`, `eyes.stl`
* **Red**: `star_1.stl`
* **Orange**: `star_2.stl`
* **Yellow**: `star_3.stl`
* **Green**: `star_4.stl`
* **Mint or Cyan**: `star_5.stl`
* **Blue**: `star_6.stl`
* **Purple**: `star_7.stl`
* **Pink**: `star_8.stl`

SimpleFlips Drippy Star Disc Display

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4898318.

# About

This is a display piece of a drippy star for [SimpleFlips](https://www.youtube.com/SimpleFlips).

The stand in the preview images is [Challenge Coin Display Stand](https://www.thingiverse.com/thing:516444) scaled up 175%.

Please let me know if you have any issues with printing/assembling, I'd be happy to help :)

Original listing: https://www.thingiverse.com/thing:4889827 (Wouldn't show up on my Thingiverse profile)

# Assembly

Each color is printed separately.

To assemble, each piece should slot in to the cutouts in the background piece, and then adhered with glue.

# Colors

Below are the colors I designed the piece to be printed with:

* **Black**: `background.stl`, `eyes.stl`
* **Red**: `star_1.stl`
* **Orange**: `star_2.stl`
* **Yellow**: `star_3.stl`
* **Green**: `star_4.stl`
* **Mint or Cyan**: `star_5.stl`
* **Blue**: `star_6.stl`
* **Purple**: `star_7.stl`
* **Pink**: `star_8.stl`

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4871022.

# About

This is a display piece for the band [Red Vox](https://www.redvoxband.com/).

The stand in the preview images is [Challenge Coin Display Stand](https://www.thingiverse.com/thing:516444) scaled up 175%.

Please let me know if you have any issues with printing/assembling, I'd be happy to help :)

# Assembly

Each color is printed separately.

To assemble, each piece should slot in to the cutouts in the background piece, and then adhered with glue.

**NOTE:** Some pieces of the logo are delicate (specifically the tuners next to the headstock) so handle and glue with care. Each tuner is different so make sure you can tell which is which before gluing them in place.

# Colors

Below are the colors I designed the piece to be printed with:

* **Black**: `background.stl`
* **White**: `logo.stl`
* **Red**: `ring.stl`

Red Vox Disc Display

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4859959.

# About

This is a display piece for the band [Tally Hall](https://www.tallyhall.com/).

The stand in the preview images is [Challenge Coin Display Stand](https://www.thingiverse.com/thing:516444) scaled up 175%.

Please let me know if you have any issues with printing/assembling, I'd be happy to help :)

# Assembly

Each color is printed separately.

To assemble, each piece should slot in to the cutouts in the background piece, and then adhered with glue. Each ring piece/ring slot is identical, so five ring pieces need to be printed with different colors.

**NOTE:** Tolerances are a bit tight, especially if you get any elephant's feet on the slotted pieces. I needed to cut off excess material at the bottom of the pieces to make it easier to fit together (especially for the tie pieces). Fortunately the areas that need to be cut shouldn't be visible in the final piece.

# Colors

Below are the colors I designed the piece to be printed with:

* **Black**: `background.stl`
* **White**: `logo.stl`
* **Red**: `tie_left.stl`, `ring_piece.stl`
* **Blue**: `tie_mid_left.stl`, `ring_piece.stl`
* **Yellow**: `tie_mid.stl`, `ring_piece.stl`
* **Gray**: `tie_mid_right.stl`, `ring_piece.stl`
* **Green**: `tie_right.stl`, `ring_piece.stl`

Tally Hall Disc Display

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4871035.

# About

This is a display piece of a Vineshroom from [Vinesauce](https://vinesauce.com/).

The stand in the preview images is [Challenge Coin Display Stand](https://www.thingiverse.com/thing:516444) scaled up 175%.

Please let me know if you have any issues with printing/assembling, I'd be happy to help :)

# Assembly

Each color is printed separately.

To assemble, each piece should slot in to the cutouts in the background piece, and then adhered with glue.

**NOTE**: While similar, none of the curved white pieces are identical. Do a dry fit to ensure you know which slot each piece goes in before starting to glue them in.

# Colors

Below are the colors I designed the piece to be printed with:

* **Black**: `background.stl`, `mouth.stl`
* **White**: `white.stl`
* **Green**: `green.stl`, `eyes.stl`

Vineshroom Disc Display

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4900938.

Had some slightly smaller CD cases that I wanted to use in the [original stand](https://www.thingiverse.com/thing:1533786), so I modified it to fit them.

The cases I measured are about 6mm in depth, and fit loosely but upright in the stand.

Smaller CD Case Stand (6mm depth)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4900945.

Wanted to hold decks of playing cards in the [original stand](https://www.thingiverse.com/thing:1533786), so I modified it to fit them.

The decks I meansured were between 18mm and 20mm in depth, and fit loosely but upright in the stand.

Deck of Cards Stand (20mm depth)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

bigfoot

Achievements

Seedling

Hawaii: Part II Disc Display

SimpleFlips Drippy Star Disc Display

SimpleFlips Drippy Star Disc Display

Red Vox Disc Display

Tally Hall Disc Display

Vineshroom Disc Display

Smaller CD Case Stand (6mm depth)

Deck of Cards Stand (20mm depth)