It felt weird holding guns in VR and not being able to have proper trigger discipline lol. So I found a different Oculus controller shroud, stuck a Glock trigger guard on it and voila. I had to cut the shroud short to compensate for the VR shoulder stock adapter.
Print in 100% infill with the trigger pointed down and add supports.

Oculus Trigger Guard.stl

I wanted to see if I could print a recoil absorbing pad like the Limbsaver I bought out of TPU. So a couple days of designing later and I have these. ~~V1 I based of an airsoft AR stock, V2 I changed it out for a spiky texture, V3 I gave up on textures because a flat surface allows for the most squish.~~
I have since gotten _much_ better quality printers and gotten better at Fusion. This one is smoothed out and feels better against your shoulder. 
The setting that seemed to yield the best results are 
10% infill Gyroid
15mm/s

Slip-on Recoil Pad (Limbsaver)

Limbsaver New.3mf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5403757.

I saw on Reddit that Loid Forgers gun is a mashup between the Walther PPK and a German Luger 9mm. I found the 2 models, threw them into FreeCAD, and one crash course on FreeCAD and 3D Builder later we have this thing. 

6/7/22

6/13/22 I added a model with the suppressor already attached, but the only variant that fits in my printer is the Anya sized model. I have not test printed that one.

7/14/22 I've now added 2 more variants of threaded barrel models and their suppressors in the correct heights so no scaling is required. The threading is NOT standard by any means. I just took the existing threading on the base model and stretched it. As of right now I have not test printed any of the new models, but I dont see why this wouldn't work.

10/27/22 After a LOT of trial and error, I have come up with a quick change and screw-on attachment system for a suppressor. It consists of the gun, a lug adapter, and the suppressor. I added a model with the threading already attached because its probably stronger. However, I like the quick change model as it doesn't change the side profile of the gun making it better suited for pictures. Both the lug and the threading are tightened by turning them clockwise while the gun is pointed away from you. I have test printed everything (a LOT) except the one with the threading because I literally just stuck the adapter on the digital model and called it a day.

Loid Forger Gun Prop

Lug_Loid_Sized_Gun.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5591483.

I noticed that Chisato's 1911 is more unique than just slapping a compensator on a 1911. Luckily other more talented people gave me all the tools I needed to make a perfect life-like model.

V2 has VERY minor tweaks. I fixed the messy embossed font on the left side, added a half-assed thumb rest like in the show, and rendered the main gun as one piece for improved accuracy when slicing.

Chisato Nishikigi Custom M1911

Chisato Custom M1911

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5591556.

This is a remix of a model from: https://sketchfab.com/3d-models/smith-wesson-mp9-88681ea19a554a59a83ce8ac4e5dff25 by Mr Stickman. All I did is reinforce the end of the barrel to accomodate my custom lug suppressor system.

In the show, Takina is shown to use the gun mostly suppressed but occasionally unsupressed. Somehow in that scene, the gun doesn't have any threading where the suppressor is supposed to attach. For this reason, I use the quick change system so cosplay pictures will always be accurate.

Both the lug and the threading are tightened by turning them clockwise while the gun is pointed away from you

Takina Lycoris M&P 9 Pistol

Takina_MP_9.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5542281.

I noticed Chisato's compensator had fewer, but longer spikes on the front and ports in the top hexagonal section. So I made a few edits and here we are. I've only tried this on an Elite Force Tac 1911 Airsoft gun. I have not printed the exact file uploaded here as well. The one  in the photos was my second attempt.

"Lycoris Recoil" Chisato M1911 Compensator

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

bencarl96

Achievements

Seedling

Debutant

Explorer