drop your clamp and go guide and break the spring retainer end cap? you're welcome.

Clamp and Go Saw Guide Replacement Spring Retainer Clip

modified steering knuckle for the enduro24 to keep steering rack level while tilting the driveshaft end of the differential up. allows for much more suspension travel when paired with longer linkages

Enduro24 Rotated Steering Knuckle

Replacement less bulky bumper for the Enduro24

Enduro24 Tube Bumper

Flange to adapt a Toyota 3k carburetor to a late model Suzuki Samurai full rubber air cleaner.

Suzuki Samurai Toyota 3k Carb Adapter

a harness for smaller size automotive 4-pin relays. I designed this off of a hyundai/kia relay I had laying around but it should be usable for most other 4-pin relays. Designed to hold  1/4" (6.3mm) open barrel female spade connectors, specifically the style with tabs that stick off of the back.

4-Pin relay harness

Flange to attach the end of a 25mm tube to anything you can screw to

25mm Tube End Bracket

Flange to attach the end of a 3/4" tube to anthing you can screw to

Three Quarter Inch Tube End Bracket

A 3D grill to replace the sticker one on the Sendero body, requires some cutting and gluing but makes the little truck look a lot nicer. Models with and without 5mm holes for LEDS in the headlights

Enduro24 Sendero 3D grill

enduro24_sendero_grill_nolights.stl

Two versions of a frame I made to use a truck body without the bed. One with a roof rack and one empty. Bottom pins slot into the stock body mount holes ones the pillars for the factory body are removed. The pins on columns will fit into holes drilled in the hood and roof of whatever truck body you use. The roof rack slots into holes in the rack base version and is secured with regular body pins.

Enduro24 Cab And Chassis truck roof rack Kit

frame_rack_base.stl

7mm hub dually rim designed for stock Enduro24 tires, 25mm largest diameter, 20 in the channels.

Enduro24 Dually Rims

Attaches to the stock Enduro24 shock towers and provides about a 1/4" of lift

Enduro24 Lift Spacers

Some things for your roof racks and truck beds. Cooler and tote come in two pieces  to glue together so you can print them as multiple colors.

1:24 Scale Offroad Decorations

jerry_can.stl

Moves the esc and battery of the Enduro24 forward and slightly lower. Also adds some room for electrical upgrades

Enduro24 ESC and Battery Relocator

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

bclarkholcomb212

Achievements

Seedling