This allows you to mount 120mm fans on a vertical piece of 3030 extrusion. It was designed to help with air circulation when heating the chamber for more even temperatures through the chamber. I have 1 fan's airflow pointing upwards, and the other pointing downwards

**How to Print**
- To get 2 mounts that will mount to either side of your printer (like in the pictures above), clone the original model, and mirror that new model on the Y Axis
- Anything should work, my standard is 3 walls, 4 top/bottom layers, 10% infill

**Materials**
- 4x M3 heatset inserts - For mounting the fan (you can also use longer screws and an M3 nut if you want)
- 4x M3 bolts - long enough to mount your fan, usually 30-40mm works
- 2x M6x8 bolts - To mount to the 3030 extrusion


Happy printing!

120mm Fan Mount for Chamber Air Circulation - 3030 Extrusions

120mm Fan Mounts - 3030 Extrusion.3mf

This is a bracket to mount 5015 fans to a V-Core 3.1's bed (or any bed with 5mm holes), which significantly improves max chamber temp and chamber heating speed. I'm able to get to 40C in about 10 minutes, and maxes out around 60C - your mileage may vary, this is very dependent on how sealed and insulated your printer is!

I used a spare bed spacer (~5.75mm aluminum spacer) that RatRig uses for their bed arms. If you don't have any, I included a bed spacer model you can print.

I used some super glue to get a good seal on the top and bottom pieces, but it isn't required.

Printer requirements
- Only use this if your printer is enclosed
- You need to seal and insulate your printer for best results

Print requirements
- ASA/ABS or more heat resistant material! You don't want these melting

Hardware Required
- 5015 fan (x2)
- M3x3 (short) heat insert (x2)
- M5x9 heat insert
- M3x20 screw (x2)
- M5x25 screw


Happy printing!

RatRig V-Core 3.1 5015 Bed Fan Mounts for Chamber Heating

RatRig V-Core 3.1 5015 bed fan mounts v11.3mf

RatRig V-Core 3.1 5015 bed fan mounts v16.step

This is a new extruder mount for the [RapidBurner](https://github.com/chirpy2605/voron/tree/main/V0/Rapid_Burner) toolhead, allowing an Eibos Artemis extruder to mount to it. It still uses 4 M3 heatset inserts, you can use long or short versions. This supports using the Artemis with the included rubber pad. 

This is tested and working on my Voron V0.2rc1!


Happy printing!

RapidBurner v0.2 v8 Eibos Artemis Mount

RapidBurner v0.2 v8 Eibos Artemis Mount.3mf

This is an EVA3 mount for the Eibos Artemis Extruder. I no longer run EVA3 on my RatRig, so this is based on CAD - that being said, the Artemis and this mount fit together well. STEP file is included if some tweaks are needed!

Note: This was designed with the intention you use the anti-vibration pad they include. Using this pad also helps prevent accidentally scraping the planetary gears against something underneath the extruder.

 

You'll need 4x M3 heat set inserts, preferably short ones.

 

Happy printing!

Printer Mods and Accessories

Models in this collection

120mm Fan Mount for Chamber Air Circulation - 3030 Extrusions

RatRig V-Core 3.1 5015 Bed Fan Mounts for Chamber Heating

RapidBurner v0.2 v8 Eibos Artemis Mount

Artemis Extruder EVA3 Mount