This is my Bento box scorpion brace adapter so that nerf gun stocks fit without reprinting frame. It is currently 7 am and I haven't slept in long time so I call it "Good E-Fucking-nough adapter". Feel free to make it not ugly but pls let the person that designed the scorpion brace originally know that I hate them with a fiery passion right now. insert make my shit straight Nga meme , Functionally it should be fine though and should just be able to swap from scorpion brace to this monstrosity. Just didn't want to use so much plastic on a part that I don't need to spent time printing (this is 90g vs roughly 300g for scorpion brace and can be refined a ton to use less plastic)

Bento box scorpion brace adapter

5 am 36 hours awake tinkercad -good E Fucking nough- adapter.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5328453.

A QUIET and SIMPLE automatic door closer that will only work on specific doors that open a specific way so use common sense and u be fine boi. I MIGHT make one for other doors.

REQUIRES:
filament for hinges
skrews or nails to mount
spring or somthin to pull on the lever so that the door closes

UPDATE:
NEW BIT SPECIFIED FOR WALL AND DOOR WITH SPRING ATTATCHMENT BIT ADDED

SIMPLE QUIET auto close door

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5371962.

curtain hanger that uses 1 inch rod

1" rod curtain hanger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5265060.

uh is holder thingy for samsung a12. fits inside case. for lanyard weirdos only (who tf wears a phone around their neck on a lanyard???). should be universal with most cases for a12.

ATTENTION "holdiphoneV9" IS FOR PRINTING WITH TPU/FLEX FILAMENT ONLY "bushing v6" IS MEANT TO BE PRINTED IN ANYTHING THAT ISN'T TPU/FLEX FILAMENT!!!!!!!!!!

Holdiphone for Smsg A12

v4.2 will actually work... now that I have one to measure. For 1989-98ish to hold in-dash cup holder in. print test circle if your printer is too fucked to print right size (the thing should fit WITH EXTRA FN ROOM like .8 mm of extra room that's how they are oem fight chevy not me this is an exact replica in function).

chevy cup holder retainer clip

cup holder retainer clip v4.2.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5190180.

Those 3 things but fixed because cura 4.10 wouldn't even spawn them in. Oh and the part where the tabs connected to the pins was crappy 2012 jagged garbage so a few clicks and no more problems.

trigger/sidepin fix/bucket fix 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4921075.

NOT YET PRINTABLE just here to mark my spot so no-one starts doing the same and we end up like those 2 NASA facilities essentially making the SAME THING and wasting our time and effort the right half is done (this) but may have minor tweaks to it before/when I get the left side finished. (P.S. FREECAD SUCKS so I had to go to Tinkercad to complete) (P.s. P.s. I got the names mixed up for the baseplate and the controller mount will fix them later)

Xbox 360 version (NOT YET FULLY PRINTABLE)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4930587.

I fixed the weak part

fixed for my needs (too weak, broke so i fix)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5237418.

This fits my cheapo china soldering iron (the one from the second picture taken direct from ebay seller listing cause f u I lazy)

PRINT HOWEVER U FACN WANNA PRINT I AINT YA MOMMA SO I AINT GUNNA TELL U HOW TO DO SHITE FIGURE IT OUT LIKE A BIG KID

Soldering Iron Wall Mount

This fits my cheapo china soldering iron (the one from the second picture taken direct from ebay seller listing cause f u I lazy)

PRINT HOWEVER U FACN WANNA PRINT I AINT YA MOMMA SO I AINT GUNNA TELL U HOW TO DO SHITE FIGURE IT OUT LIKE A BIG KID

China soldering iron wall mount

itsa box.. made for AKK Ultra Long Range VTX.... made for a friendly bastard snail

Box for AKK Ultra Long Range VTX

box for action the bastard snail top.stl

box_for_action_the_bastard_snail_botton_v1.1.stl

I liked the idea but didn't have a way to mount it under anything so I've done this to mount it to the wall. I've also added numbers and 2 holders for those random keys that don't have a ring installed. Print however you want to just don't complain if you mess something up.  

DISCLAIMER: Not suggested to put more then 4 keys per hook without scaling up model!!! I tried to reinforce but with this design currently not possible to do so! Made with TinkerCad on laptop so fuck off if you say its too crude! Also sorry if your printer is small I have ender 3 pro and it fits on mine!


key holder v2

key_holder_v2_ringless_holder_left_baseplate.stl

key_holder_v2_ringless_holder_right_baseplate.stl

key_holder_v2_vertical_hook.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

awesomeness6679

Achievements

Seedling