Designed for multilayer color swaps. If you have a printer capable of swaping itself, this is set up for cura and you to set colors. If you don't have multicolor printer, use pause at height and swap manual colors. Or don't swap at all and paint it. Needs a 4x3 piece of 1mm clear shielding, like PETG panes or Plexiglass to go in front of card.

Star Trek Themed Vaccine Card Holder

Don't print this, too much bridge. Its just for the model demo

Full Object.stl

Dark Souls Themed Vaccine Card Holder

full object.stl

Oregon Trail Themed Vaccine Card Holder

FULL MODEL.stl

This will need to be glued together, superglue works best, you will also need a 1 mm thick, 4 in by 4 in plexi plate or other clear protective material to keep the card safe.

Finally Protected - Vaccine Card Holder

FLASH1.stl

You don't need this. Its weird. Put your vax card in it. Designed to be printed with 1 mm plexiglass pane to protect the card (4 in by 3 in). 

Vax me sempai

AHEGO FLASH.stl

Do your part, move toward victory. This is inspired by the BOS flag from the Fallout game series.

Designed to use a 1mm 4 inch by 3 inch piece of plexiglass or other clear protector in front of where the card would slot.

Set up for dual color printers, but can be used with single.

Fallout BOS Vaccine Card Holder

COMPLETE.stl

There was a hole here, its gone now.

Designed to accommodate vaccine cards. Needs a 1mm (4in by 3 in) sheet of plexi or other clear protector to be fully utilized.

Silent Hill inspired Card Holder

PART3.stl

Vaxes and Venues

VAXES AND VENUESFlash.stl

Assembled, don't print this, it wont work lol

V&V.stl

Silent Hill themed Vaccine Card holder. Customize your vault number!

Designed for dual head printer, few tweaks, and you can just bypass that and paint it.

Needs a 4x3 piece of 1mm thick plexiglass for optimal protection and security.

SILENT HILL THEMED Vax card holder

Fallout themed Vaccine Card holder. Customize your vault number!

Designed for dual head printer, few tweaks, and you can just bypass that and paint it.

Needs a 4x3 piece of 1mm thick plexiglass for optimal protection and security.

Vault-Vax Card Holder

Vault-Vax-Side2.stl

This is my version of a Vaccine Card holder based on the Fifth Elements multi-pass. Designed in Tinkercad.

This item will need to be printed, and then glued. Depending on printer tolerance, you might need to trim the circular fitting.

You will also NEED a 1mm 4 inch by 3 inch piece of plexiglass or PETG.

Vax-Pass

Side1.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

aristrofl

Achievements

Seedling

Debutant