This is a lampshade that made to make my basic cheap IKEA lamp look good. This was designed in bambu studio and is ideal for bambu printers using the .3mf file I have upoladed. Using the step file will require a little bit of work in your slicer.

Model contains 2 objects that sit on top of each other on the lamp. The bottom portion of the lamp is slightly largers to provide a better base for the top part to sit on.

Scale up or down the Z-axis of each plate to your liking to achieve different heights on the lampshade.

Some post-processings is required.

Link to MakerWorld model for bambu printers: https://makerworld.com/en/models/545994#profileId-463836

Three model files are included. 100% Z-axis scale, 75% Z-axis scale, 50% Z-axis scale

.3MF FILE DIRECTIONS:

Download the .3mf file containing the geometry data and make sure the print settings are as follows.

-Vase Mode (Smooth)

- Inner and outer brim, 7mm, 0mm spacing

-Arachne wall generator

STEP FILE DIRECTIONS:

Download the step file and import it into your slicer. Apply a uniform scale on both objects until the model fits your print area. After this you can scale the Z-axis up or down to your liking. 

You will need to add a generic cylinder to each model. Center the object, add a generic cylider, center the cylinder,  scale it to 150mm in the x and y axis, and 0.4mm in the z-axis. Add another generic cylinder. Center it and scale it to 80mm in all axises. Make this cylinder a negative part. This will be the cutout for the lightbulb to go into. Align the cylinders and move them around until the fit flush in the center of the model without the negative part cylinder touching any of the walls of the model.

Make sure the print settings are as follows:

-Vase Mode (Smooth)

- Inner and outer brim, 7mm, 0mm spacing

-Arachne wall generator


ASSEMBLY INSTRUCTIONS:

-Remove the model carefully from the bed of the printer as it is flimsy and can easily break

-Remove the outer brim of each part

-DO NOT remove the inner brim of the first wall or any of the brims after the outermost layer of walls as the inside brims also provide some structural integrity to the object

-Remove your lightbulb from the lamp

-Place the bottom part of the shade upside down on the lamp

-Place the top part on top 

-With both parts sitting on top of each other place and screw in the lightbulb

-Gluing the brims of both objects together will achieve a studier lampshade

Lampshade for IKEA TÅGARP

100_Scale_StandingLampshade v6.3mf

Basic M3 nut holder that is designed to get into those hard to reach spaces using your two fingers as holders. Uses 2 grams of filament and prints in 20 minutes on an X1C. Works as a good extender to hold M3 nuts when your hand can't get into the spot to put the nut onto a screw.

M3 Nut Holder

M3 Nut Holder.step

Under desk honeycomb holder I designed for my 2 layer desk setup at work. This model is designed to be placed on the underside of a desk and is most easily mounted to the underside of a desk using command strips or glue. Pro tip: tape the bottom of your desk if you do not want to leave marks. Each individual slot is big enough to hold markers, highlighters, multiple pens, and multiple pencils. Ignore the weird erratic pattern of the filament I used recycled Bambu PLA that I made myself for this print. The linked 3MF file is designed with regular Bambu PLA Basic however

HONEYCOMB PENCIL HOLDER

HONEYCOMB PENCIL HOLDER v1.step

This is a holder for a square PETG media bottle. This holder is designed to keep the bottle at a 45 degree angle rotated on its corner so that every drop of feed material inside the bottle can be extracted when a tube is inserted into the bottle. This model allows for different sized bottles to be held within it and the model can be scaled up or down depending on your needs. This holder is incredibly useful for when you need all feed material to be extracted into for example a HPLC machine. The 3MF file contains all the necessary settings to be printed successfully. If you are downloading the step file it is worth wile to slow down the speed of the printer when the overhangs are printed. 

Angeled Square Bottle Holder

Angeled Square Bottle Holder.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

anevrotski

Achievements

Seedling

Voyager

Lampshade for IKEA TÅGARP

M3 Nut Holder

HONEYCOMB PENCIL HOLDER

Angeled Square Bottle Holder