Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1947364.

11 pieces compatible with the LENA Cascate sets

Marble run set (LENA Cascade compatible)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4753941.

Follow the assembly instructions.

For maximum 87 mm wide rolls use 8x120 (2) and 8x100 (2) screws with 2 small tube per screw.

If you want 3 cm more, use 150 and 130 screws, 3 small tube per screw and the LongerTube.

Use standard 608 ball bearing.



Ender 3 Filament roll holder 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1927229.

This is made by combining the two projects:

- Universal mount http://www.thingiverse.com/thing:1927212

- Cup holder hack http://www.thingiverse.com/thing:1873724

Bottle/can holder for Smart ForTwo 450

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2356981.

covfefe keychain

covfefe

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1846420.

The original one was too small for the cage, so I printed this one. It fits the Ferplast cage.

Guinea pig/Hamster's salt dispenser.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2063969.

GoPro mount, tie with plastic zips.

90° and 45° available here:
http://www.thingiverse.com/thing:2067413


Here is a video taken from this position:
https://youtu.be/UICpbslgEJU

GoPro mount for snowboard or ski

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1456595.

I made this for the next Star Trek convention in Italy (William Shatner will be there!)

Convention's pass holder with Star Trek logo

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4748861.

I didn't like the way the screw was free to move, so I made this part

Ender 3 V 2 z axis screw protector

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1987582.

Gmatptatm

Gmatptatm keychain

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1467898.

It's just the tab, if you need to mount a clicgear accessory to a non clicgear cart.

ClicGear tab

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2067413.

GoPro mount, tie with plastic zips.

Refer to this:
http://www.thingiverse.com/thing:2063969

Here is a video taken from this position:
https://youtu.be/UICpbslgEJU

GoPro mount for snowboard or ski (90° and 45° version)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2071779.

It's a two pieces extension. Should be fixed together using a 2,5x8 screw (see picture).

You can use them separately as well.

GoPro rotative extension mount 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1873724.

I made it because the bottle was always slipping out.

Clicgear cup holder hack

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1999959.

This is a cap holder for both 62 (Tamron) and 52 (Nikon) caps.

Tamron Nikon dual cap holder 52 and 62 mm

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1921820.

It's not perfect. I made it for another project, use it as you want :)

Back to the future logo

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1927212.

This support is for use with other projects

Universal adapter for Smart ForTwo 450

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2021829.

Same as previous, but with the star trek logo.

Tamron Nikon dual cap holder 52 and 62 mm with Star Trek logo

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1459958.

As seen on Galaxy Quest :)

You may print the first two layers black, then change to silver filament.

Galaxy Quest Guy's pendant

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4755076.

mette le viti tutte dritte!

Allineaviti "vita da informatici"

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1861240.

This is the easiest version to print. Keep the tealights in place using rubber bands.

Holds up to 5 tealights. Use LED tealight only.

Halloween Jack-o'-lantern tealight holder MK3 (easier)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1986014.

My wife has long nails, so it was almost impossible to use the stopwatch without damaging the cover. This hack should solve the problem.

Use some glue to fix the button.

IKEA hack

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2066422.

Use a 5x30 screw

Very short GoPro screw knob

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1368052.

Zipper for Galaxy Quest costume

Galaxy Quest Zipper

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1453486.

New version, just put you original zipeer into this one and fix it with some glue.

Galaxy Quest Zipper MK2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1989809.

This small halfring helps to mount the dandelion chip on a Contax/Nikon adapter. It may work on different adapters as well.

Dandelion chip mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2360078.

covfefe keychain mk2

covfefe mk2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1860427.

Remixed from a previous project

Halloween Jack-o'-lantern tealight holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1817591.

I printed this holder because the putty is no longer available.

It works with the Barcus Berry 1332 pickup.

Barcus Berry piezo pickup holder for double bass

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1433945.

Captain Jason Nesmith's ranking insignia

Galaxy Quest Insignia

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1859603.

Holds up to 5 tealights. Use LED tealight only.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1331360.

Straker puppa

Straker Puppa

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1979033.

If you need to mount a 50mm fan instead of a 40mm one.

40mm to 50mm fan adapter

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

albertomaria1965

Marble run set (LENA Cascade compatible)

Ender 3 Filament roll holder

Bottle/can holder for Smart ForTwo 450

covfefe

Guinea pig/Hamster's salt dispenser.

GoPro mount for snowboard or ski

Convention's pass holder with Star Trek logo

Ender 3 V 2 z axis screw protector

Gmatptatm keychain

ClicGear tab

GoPro mount for snowboard or ski (90° and 45° version)

GoPro rotative extension mount

Clicgear cup holder hack

Tamron Nikon dual cap holder 52 and 62 mm

Back to the future logo

Universal adapter for Smart ForTwo 450

Tamron Nikon dual cap holder 52 and 62 mm with Star Trek logo

Galaxy Quest Guy's pendant

Allineaviti "vita da informatici"

Halloween Jack-o'-lantern tealight holder MK3 (easier)

IKEA hack

Very short GoPro screw knob

Galaxy Quest Zipper

Galaxy Quest Zipper MK2

Dandelion chip mount

covfefe mk2

Halloween Jack-o'-lantern tealight holder

Barcus Berry piezo pickup holder for double bass

Galaxy Quest Insignia

Halloween Jack-o'-lantern tealight holder

Straker Puppa

40mm to 50mm fan adapter

IKEA hack