Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4848763.

Have a few watches around. Decided to make a watch stand. As you can see, it can fit 4 large watches (barely :)).

Printed upright with support from the top of the base. Maybe some will find a better way to print. 

Yogitech like coffee, support here:
https://ko-fi.com/yogitech

Watch Stand

This is a hand mounted tape dispenser for easy gift rapping poster hanging, etc.

Printed in 2 main parts: 

The base: no special printing considerations here. Suggest that you use PETG as it is more flexible then PLA although it should work with PLA as well.

The cutter which should be printed separately in the orientation shown in one of the pictured

This is printed in different orientation as to have sharper edges for tape cutting. Having sharp edges made out of plastic is a challenge for this application. this strategy gave the best results. Print slowly (supports are required) and with perimeter edges set at .30mm in the slicer. This should turn out well with a .40 nozzle. Layer height .2 or even .15

Once everything is printed. insert the cutter into the base as shown in one of the pictures

This tape routing element is present in the eventuality that the cutter is not as sharp and has difficulty cutting the tape in its normal position. Is should provide a sharper angle and hopefully assist with better cutting.

SUNLU black PLA used: 

SUNLU PLA

Use Coupon code for a discount: 7JOWET2KWG

Tape dispenser/holder hand mounted

cutter.3mf

cutter.stl

tape hand holder base.stl

hand tape holder base.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

YogiTech