Charismas is right around the corner, and what represents the holiday better than a snowman!
The body and hands print separate.
The hands fit well for me. Feel free to scale them up or down as needed. You can use glue to secure them in place.
There are two versions: regular and keychain!

Printing Parimiters:
Lay the snowman flat on its back.
Other than that, just use default settings.

Check out my Articulated Snowman on Cults3D:
https://cults3d.com/en/3d-model/various/articulated-snowman-ydesign

Get 10% off using the coupon code: ASM2023

Snowman

Snowman.stl

Soda can piggy bank!
There are 6 different brands and 3 different lid tolerances.
East print no support needed!
I colored mine after printing, I added pre-painted 3mf files. There are pictures from bambu slicer so you can better imagine the model potential!
If you like the model, it's in a contest on Printables, a like and download there will be awesome!
www.printables.com/model/656006

Printing Parimiters:
Print the can on the open side. That way you need no support. I do recommend adding a brim.
You can print the top file as it is.
Other than that, just use default settings.

Soda Can Piggy Bank

Soda Can Coca Cola.3mf

Simple and easy print, Great for Christmas!
Made to be printed in vase mode, it can be printed regularly as well.

There are two different toppers with two different stars. The thick version is for the original tree size. The non-thick topper is for 200% and larger. You can print only the star (without the topper) if you like and glue it to the tree. I used a lighter to melt the top of the tree\topper and combine it with the star.

Printing Parimiters:
If you're printing in vase mode, print at 0.2mm or lower.
Other than that, just use default settings.

Low Poly Christmas Tree

Low Poly Christmas Tree.stl

Made a Comb version of the Butterfly Knife by Night Raid
https://www.printables.com/model/402593
The knife is replaced with a comb
The handles are a little different, so the comb can fit inside.
I made the connecting pins a bit smaller for an easier installation.
Enjoy!

Comb Butterfly Knife

Comb.stl

FC Barcelona symbol and stand

There are 3 different versions:

   1. 2 Color option (barcelona fc full A&B)
   2. 6 Color option ‘First layer change’ (First 
   layer change.zip & gcode 0.6mm nozzle 
   50% size.zip)
   3. 6 Color option ‘barcelona fc full 
   multicolor.zip’
   The stand is good for all models. 
   (remember scaling all the files to the same 
   scale)

For version 1:
Make a simple filament change at height. I recommend adding a purge block.
For version 2:
You can use the provided g.code for a 50% scale pre-sliced version labeled by colors. The order you print doesn't matter except for the black that needed to be printed last. The model was sliced to an ender 3 S1 with a 0.6mm nozzle and 0.3 layer hight.
If you want to use the stls, you'll need to open them all together in the slicer, align them, and create a separate g.code for every color. Bear in mind that the colors are 0.3mm high and so is the cut out in the black model.
If you scale the model, I recommend leaving the z at 100% scale.
Make sure to have good bed adhision and a perfect first layer.
For version 3:
You can use the provided g.code for a 50% scale pre-sliced version. The color changes are in the following order: black, blue, red, white, yellow and gold. 
There are two different g.code files made for 0.4/0.6mm nozzle with 0.2mm layer height

FC Barcelona

barcelona fc full A.stl

Star of David Clipper Sleeve

Make any Clipper lighter special with the Clipper cover sleeve!
Two different version, #2 has more stars of david and smaller stars.

Printing Parameters:
recommended to print with a 0.4mm nozzele and at 0.2mm layer hight.
Add a brim if you print a bunch of them.

Star of David Clipper Sleeve

clipper sleeve star of david.stl

**In loving memory of the victims of the horrific terror attack on October 7**


 

 

Printing Parameters:

For the ‘Filament change’, change filament at 2mm hight. For the ‘love israel red heart’ make two filament changes at 2mm & 3mm.

For the ‘First layer change’, align both files (A&B) in the slicer, slice both files separately. Print file A and then B.

First layer change tips
Apply z hop at 1mm
Make sure you have a good first layer and good bed adhesion
If you use bl touch\cr touch make sure the print file isn't in the middle of the bed (so the z axis homing won't touch the already printed file A)

Support Israel

love israel.stl

Led Controller Wall Mount

Simple and easy print
Made to be glued to the wall with double-sided tape. 

Printing primiters:
Maybe use a brim dependes on your bed adhosion
Other than that just use defult settings

Led Controller Wall Mount

Made this quick printing door stopper.
I printed it in full TPU and it works great!
You can mix TPU with PLA to achieve this unique look and make everyone jealous you have a 3D Printer ;)

Printing Parameters:
Layer Height: 0.2 mm
Infill: 20% at least
Wall Thickness: 1.2mm for extra strength
Support free

To achieve a functional color change change filament at layer 41 (in original size)

Door Stopper

Boom Arm Base
Made as a replacement for the ikea base that broke
Can be used for any boom arm
Mounted by 4 screws
I printed it in PETG with 1.2mm wall thickness and 20% infill
Works great


Boom Arm Base

Boom Arm Base.stl

Cute Mini Christmas Present
Two versions one regular and one with a key chain hole

Check out my Christmas present with legs on Cults3D:
https://cults3d.com/en/3d-model/art/christmas-present-present-with-legs

Get 10% off using the coupon code: CPWL2023

Christmas Present

Charistmas present.stl

Can hold up to 8 incense sticks
Each stand is 2\3mm in diameter
The incense angle ensures the ash falls inside the tray

Made for 100mm long incense stick with a 1.5mm diameter stick base

incense tray.stl

SMOKING KILLS!!

Made these four different models of an ashtray
try and quit smoking, but in the meanwhile dispose your ash with style

I printed them with a 0.8mm nozzle works great and a fast print in about 1h.


If your using a smaller nozzle i recommend the wall and top\bottom thickness would be at least 1.2mm.

Ashtray

ASHTRAY twisted squere .stl

Easter is right around the corner, and what represents the holiday better than the Easter Bunny and Easter Eggs! So why not make them one?

There is a version with legs you can check it here:
https://cults3d.com/en/3d-model/art/hatching-bunny-with-legs

Happy Easter!

 

Printing Parameters:
Just use default settings

Hatching Bunny.stl

Wood Pallet


There are 3 different models for you to choose from
The purpose is not clear, I just think it's cute and cool
No support is needed, print it in the default orientation 
Enjoy!

Wood Pallet

Wood Pallet A.stl

Chmapagne Bottle
Two versions one regular and one with a key chain hole

Check out my Chmapagne with legs on Cults3D:
https://cults3d.com/en/3d-model/art/champagne-with-legs

Chmapagne Bottle

champagne.stl

Pascal Tangled

After watching Tangled for the first time recently, I had to make this cool little dude!
Angry Pascal 2D Art style with a base

Printing Parameters:
Preffered nozzle & layer width 0.4mm or smaller
Filament change at 2mm hight
If you want to scale the model up, I recommend not scaling the Z (as it's just unnecessary and wasteful), so you'll need to scale Pascal only on X & Y, and the Pascal base on X & Z 
(for scaling over 200% I recommend scaling all axeis for better base stability)

Pascal Tangled

Pascal Tangled.stl

Easy and practical coasters!
There are two different bases holding 4\7 coasters
Don't be boring like me and use colors ;)

Feel free to scale up to your needs! scale only A & Y axeis.


Printing Parameters:
Just use default settings

Octagon Coasters

Octagon Coasters.stl

Simple Wall Hook

Simple, easy and quick wall mounted hook for keys!
It can be used for hats, coats, towels etc
Two different screw hole sizes
 

Printing Parameters:
Infill 50-100% for strength

Simple Wall Hook

Simple Wall Hook S.stl

Simple and easy to print door handle. 

There are two different versions.
A one piece version and a base and handle version (as in the pictures)
The handle itself is smaller in diameter than the base so it could be screwed easily! 
I recommend printing the base and handle version simply because if the handle brakes, you could replace it easily and less wasteful.

Printing primiters: 
I recommend adding additional walls and making the infill at least 30%. 
No support is needed!

Door Handle

Door Handle One Piece.stl

Clean simple and elegant Burn Door Handle!
The combination of practicality and decor!

Made with pegs to hide to screw for that clean look.

Printing primiters: 
I recommend adding additional walls and making the infill at least 20%. 
No support is needed!

Barn Door Handle

Barn Door Handle.stl

Bed Leveling Test

Charistmas present key chain.stl

Handles.stl

Pins.stl

Star fot Tree Top Thick.stl

Star fot Tree Top.stl

Tree Top Thick.stl

Tree Top.stl

Designer and maker |
Check out my Cults3D profile
https://cults3d.com/en/users/Ydesign/creations

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Y Design

Achievements

Seedling

Fan Favorite

Pinned models

Christmas Present

Comb Butterfly Knife

Low Poly Christmas Tree

Snowman

Soda Can Piggy Bank

Low Poly Christmas Tree

Comb Butterfly Knife

FC Barcelona

Star of David Clipper Sleeve

Support Israel

Led Controller Wall Mount

Door Stopper

Boom Arm Base

Christmas Present

incense tray.stl

Ashtray

Hatching Bunny.stl

Wood Pallet

Chmapagne Bottle

Pascal Tangled

Octagon Coasters

Simple Wall Hook

Door Handle

Barn Door Handle

Bed Leveling Test