FC Barcelona symbol and stand
There are 3 different versions:
- 2 Color option (barcelona fc full A&B)
- 6 Color option ‘First layer change’ (First layer change.zip & gcode 0.6mm nozzle 50% size.zip)
- 6 Color option ‘barcelona fc full multicolor.zip’ The stand is good for all models. (remember scaling all the files to the same scale)
For version 1: Make a simple filament change at height. I recommend adding a purge block. For version 2: You can use the provided g.code for a 50% scale pre-sliced version labeled by colors. The order you print doesn't matter except for the black that needed to be printed last. The model was sliced to an ender 3 S1 with a 0.6mm nozzle and 0.3 layer hight. If you want to use the stls, you'll need to open them all together in the slicer, align them, and create a separate g.code for every color. Bear in mind that the colors are 0.3mm high and so is the cut out in the black model. If you scale the model, I recommend leaving the z at 100% scale. Make sure to have good bed adhision and a perfect first layer. For version 3: You can use the provided g.code for a 50% scale pre-sliced version. The color changes are in the following order: black, blue, red, white, yellow and gold. There are two different g.code files made for 0.4/0.6mm nozzle with 0.2mm layer height