Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2507060.

I made this model from my Fatalis model and the Castle dice tower by LennartS. It was an idea a got by talking with a friend about dice towers with dragons. Because of the print volume on my printer, I can't print it one piece in full size so I printed it 57%. Because of that I'll try to split it to seperate pieces later. If you print this in full size, I would love to see the finished product. 

Update: The files that starts with Tower_Dragon2_new is updated. they should be better to print because the dragon don't intersect with the tower, but are merged with it. Some slicers has problems with intersecting faces so I fixed that. I also added a model with the head cut off so you don't need custom support to print it. 

Update 2: I got a request to add the dragons body separated from the tower, so I added a dragon body and a dragon tail file. If you want to print the dragon by itself, print these files together with wings and head, and print the original tower by LennartS. The you need to assemble the body and tail around the tower. 

I also want to thank you alll for the positive feedback. It makes me very happy that so many people like what I did with this tower and it became much more popular than I could imagine. Many people asked for different versions of the model which i think is great. I designed this to work with my priunter so I understand that it doesn't fit everyones. I hope this update answers to the requests I've gotten. If you still want me to fix/change something just ask in the comment or send me a message. 

Castle dice tower with dragon

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3700949.

In a pile of rotten bodies of dead animals you can see a movement. Up comes a head covered with rotte flesh. It opens the mouth and you see the jaw seperates in a inner and outer jaw with long, sharp fangs. Its wings are covered with strands of rotten flesh that drips down. The air around it stinks and you feel it burns your skin. The grotesque dragon you have ancountered are Vaal Hazak from the Rotten Vale. 

And finally you can print your own. I made this model to be used in my D&D campign so the scale is as a huge monster. And now i give it to you people out there that enjoy Monster Hunter. Hope you like it and remember to share yoour prints. I love to see people print my models. 

Vaal Hazak

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4680002.

I got inspired by some of the nutella glass out there, especially the Dragon Wine Glass by Cemal Cetinkaya at Myminifactory, and by a dragon goblet I bought at an amusement park some years ago, so I created my own. As i love ancient egypt, I created one covered in hieroglyphs with scarabs covering the cup, and green leaves and reeds covering the foot. It fits one of those round nutella jars. 

Scarab Goblet

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1829934.

After I got a 3D printer, I had thought about doing a big project. Since I love halloween and Monster Hunter there is nothing better project than making the most awesome looking weapon in the game. I spent almost 5 hours in blender to model this, and around 2 weeks to 3D print it and assemble it. The only thing that is not 3D printed is the stick i used as handle. I got this from my neighbour. 

Now you can all get yourself a dark scythe and go and hunt some wyverns! Have a happy halloween!

Interested in monster hunter? Visit the monster hunter group for discussion and sharing ideas with other monster hunter fans. http://www.thingiverse.com/groups/monster-hunter/topics

Dark Scythe from Monster Hunter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4680059.

I got inspired by the nutella glass idea, and a goblet i bought at an amusement park some years ago, so I wanted to create my own. I made an egyptian based one with hieroglyphs an scarabs coveiring the cup and reeds covering the foot. It fits one of the round nutella jars. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4620446.

A miniature for tabletop gaming based of my faviourite armor alon with my favourite long sword form the Monster Hunter games! Was going to wait with posting this since I'm creating several hunters, but because Halloween is around the corner, I thought maybe someone wants this for the season. So here is my first hunter from my upcomming collection of MH inspired minis! 

I uploaded a split version for those who wants to print a bigger figure. Just scale the pieces to the size you want.

Hope you enjoy and happy hunting!

Death Stench hunter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3905108.

As you walk in the forest, you see piles of foam and bubbles laying around. Right in front of you are a creature covered in foam, sleeping. As you approaches you see that it is the legendary Mizutusune, one of the Fated Four. It wakes up from its sleep and looks at you with its fox like head. Bubbles floats around you while you're getting ready for it to do it's next move. 

Mizutsune has become one of my favorite monster from Monster Hunter. It looks very good and has some interresting abillities. The fight is allways fun and unique. For this reason I ended up modeling it for 3D printing. The model is scaled for a tabletop miniature size. Hope you enjoy!

Mizutsune

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2504892.

Since the Fatalis (crimson Fatalis) is my favorite monster in the monster hunter games, I desided to model one! This one I made from scratch in Blender in around 5 hours. The model is not finished, but it's good enough to print (that means that I will work more with it in the future). I hope you like it, and check out the Monster Hunter group for more MH stuff:  http://www.thingiverse.com/groups/monster-hunter/topics 

Happy hunting!

Fatalis

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4293614.

For hours you've walked through sand. The air is hot and you feel tired and thirsty. You're lookning for a mythical, gold covered dragon. And there he is right in front of you. his wings stretches up to the heaven and his tail down in the sand. His wings, back and tail are covered with golden scales that shines in the hot sun. 

When i first saw a picture of this Anubis lookning dragon I had to design and print him. Even though I haven't played the phone game he's from, Monster Hunter Explore, I still needed him, and in a D&D mini scale so I could use him in one of my campign. 

The model is split in three, the two wings and the body. I also printed a 76 mm base for him and decorated it afterwards. It is scaled for a 76 mm base, but feel free to scale him up or down. 

Hope you all enjoy and happy hunting! 


Nefu Garumudo

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3397609.

This is Kushala Daora, the steel elder dragon and flagship monster in Monster Hunter Dos. This dragon controls winds that it uses to attack.

Kushala Daora

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2224858.

Nargacuga was the flagship monster of Monster Hunter Freedom Unite, that is one of my favorite games. This model is not completly finished, but it looks good printed. I made it in Blender over several days of modeling, and was printed on my wanhao duplicator 4 on 500% scale. It still need some more details, but it's fine for print. Feel free to remix if you want. Hope you like it, and hapy hunting! :D 

Interested in monster hunter? Visit the monster hunter group for discussion and sharing ideas with other monster hunter fans. http://www.thingiverse.com/groups/monster-hunter/topics 

Nargacuga

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2901476.

This model is not nearly finished. I made it on a request, but had little time working on it. this is how far i have come, and i will work on it later when i got time. It print well and looks good. If you print it I would love to see the result. 



Kulve Taroth

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3072529.

This is Gore Magala, flagship monster in Monster Hunter 4 Ultimate. There will be two models of this monster. One normal and one in frenzy mode. At the moment I'm only done with the normal one. I made this from scratch in Blender. 

Gore Magala

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3701008.

You thought you killed the necromancer long time ago, but now he stands in front of you looking much older and sinister than last time you saw him. He looks at you with a evil grin. He wants his staff back and after that torture you all into his servants. 

I needed a licha for my adventure so I designed this. The players first met him as a young necromancer, and burnt down his tower and took his staff. With these things in mind  I designed this lich. 

Trym the Lich

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3397569.

This is Ceadeus from Monster Hunter Tri. I made this underwater elder dragon in few hours during the sculpt january 2019 deep sea challenge. To make it easier to print, I split it in two and glued it together later. Since this monster is a underwater moster, I made a stand for it so it could stay in pose. 

Ceadeus

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3701021.

At the ship you can see a elve merchant sitting in a corner. He has a large backpack, red coat and golden hair. 

I wanted a elven merchant in my game so I took the task of designing one for the comunity. 

Elven traveling merchant

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3006443.

This wraith is based of the wraith from Heroes Of Might And Magic 3, the ringwraiths from Lord Of The Rings and the dementors from Harry Potter. I made it in Blender from scratch and printed it on a resin printer. 

Wraith

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2954750.

This is the elder dragon Kirin from the Monster Hunter games. The base on my print was way to large so I scaled it down on the version uploaded here. 

Kirin

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1709857.

This is a Lagiacrus figure that was originaly 3D scanned by Pezito. Here's the link to the original model: http://www.123dapp.com/catch/Lagiacrus-head/3625076

I put this model into blender to clean it up and make it more symetrical. I sent a message to the Pezito and asked to upload it here so the rest of the world could have fun with it. And here it is. So if you love Monster Hunter like me, then download and print yourself a Lagiacrus head!

Note: The printed model is an older version than the file. I deleted the stand and replaced it with a cube. It looks way better with a more smooth surface to stand on. 

Interested in monster hunter? Visit the monster hunter group for discussion and sharing ideas with other monster hunter fans. http://www.thingiverse.com/groups/monster-hunter/topics

Lagiacrus

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1715884.

This model is a rigged and modified version of a model ripped from the game. It is not as detailed as the original figure, but i think it looks very good as a 3D printed model. I hope all you hunters out there like it. 

Interested in monster hunter? Visit the monster hunter group for discussion and sharing ideas with other monster hunter fans. http://www.thingiverse.com/groups/monster-hunter/topics

Rathalos Head figure

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2866667.

This dicetower is made for the game tales of the arabian nights. My goal was to make it look like a palace or something from that world. I will try to update it with aditional parts to function like a cage, and make it look better at the table.

Dice tower of the arabian nights

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2954850.

This is the place I send my dice when they act bad. It's dark and cold and no place any dice will end up. To test it I placed my D20 die Teostra (yes i name ny dice after monsters from monster hunter) and asked him what he thought. I didn't like it much, so I told him that he will end up here when not acting good.

Dice dungeon

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

XcrismonP

Achievements

Seedling

Up and Coming

Castle dice tower with dragon

Vaal Hazak

Scarab Goblet

Dark Scythe from Monster Hunter

Scarab Goblet

Death Stench hunter

Mizutsune

Fatalis

Nefu Garumudo

Kushala Daora

Nargacuga

Kulve Taroth

Gore Magala

Trym the Lich

Ceadeus

Elven traveling merchant

Wraith

Kirin

Lagiacrus

Rathalos Head figure

Dice tower of the arabian nights

Dice dungeon