This is a Multiboard Remix of the ever popular Gravity Broom Holder.

Print the Broom Grabber on its back with no supports at 0.2mm layer height with three walls for optimal strength. The Gear should be printed on either end standing up, with no supports and 0.2 is fine. Ive used PLA find, but PETG works well for extra support or outdoor usage.

Requires a Multiboard Big Thread Bolt T-Bolt to mount to your Multiboard. I would recommend the 13 mm Big Thread, Flat Head, Bolt or the 13 mm Big Thread, Flat Head, T-Bolt.

OnShape document is available for remixing.