I have a 100x120x100mm print bed, and therefore was unable to print LTWoodcraft's excellent tile and ball holder for Hextraction. So I took it upon myself to make a split version that will fit on my pint-sized bed.

The best part of this remix is that it's not just for tiny printers – it also allows you to orient the two halves in any way you'd like. Want to mirror the original design? Spread out the three tiles around the ball holder? Make a 1x4 grid out of it? The world is your oyster (assuming that that world is also this tile holder). Just pay attention to the notch orientation!

Since this is my first time editing ANY 3D models, it's not perfect. The pieces will require sanding and gluing (cyanoacrylate or epoxy recommended), but it should come together well enough!

For novices: open this model in Cura, make sure you have Mesh Tools installed, right-click the model, and select "Split models into parts." Then print each half separately. (This may become irrelevant later, if I can be bothered to split the model itself into multiple files.)

If you have / notice any other issues, reach out to me and I'll update the file if I can. Cheers!

Hextraction is by Zack Freedman.

Remix of Hextraction Tile/Ball Holder by LTWoodcraft

Hextraction Tile/Ball Holder (Modular / tiny printer version)

Tired of your balls rolling everywhere? Here you go! Designed to keep your 3 tiles together, while keeping your balls in place.

All that's needed is a Hextraction Set and 10mm balls (which I'd assume you already have), around 25g of filament, and 6 - 3x2mm magnets (optional, the slots are indented so the balls sit perfectly in place, but the magnets hold better!), also the tolerance for the magnets is tight enough to press fit, but CA glue always helps.

The Hextraction logo piece is not connected, but will print connected if you do not move it in your preferred slicer program. 

I printed this in Creality PLA+ and switched to green PLA right at 8mm for the logo to be a different color, but you can leave it the same color if you want.

Thanks to [Zack Freedman](https://thangs.com/designer/ZackFreedman) for this awesome game idea

[Hextraction](https://www.playhextraction.com/)

Printer: Ender 3 v2

Filament: Creality PLA+

Temp: 210°c

Layer Height: (You can get away with .2mm, but i recommend .12mm

Infill: 20%

No supports

Hextraction Tile/Ball Holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

WinnerBit

Achievements

Novice Maker

Seedling

Voyager

Hextraction Tile/Ball Holder (Modular / tiny printer version)