A threaded paper holder.
Print the bolt at 97% X & Y scaling.
You can try 98% if you have faith in your printer ;)

AutoCAD file included

Threaded paper towel holder

holder R.stl

Logitech keyboard foot

Pause the print before it prints the "roof"

magnet: Φ15mm, 3mm high

AutoCAD model included

Slot-in magnet-mount for 40mm aliuminium extrusion

single magnet.stl

This is a little mount for the Y-axys stepper motor of the Elegoo Neptune 2
it only mounts with 2 screws and is 6mm shorter than the original aluminium bracket.
This is because i mounted some dampeners that increase the depth of the stepper by around 6mm, making the printbed run into the stepper.

AutoCAD file included

Elegoo Neptun 2 Y-axys stepper bracket

This is a little mount for the Y-axys stepper motor of the Elegoo Neptune 2
it only mounts with 2 screws and is 6mm shorter than the original aluminium bracket.
This is because i mounted some dampeners that increase the depth of the stepper by around 6mm, making the printbed run into the stepper.

This is a little empty tray for the left side of the Neptune 2

Remixed from: https://www.thingiverse.com/thing:5019443

Neptune 2 big left Tray.stl

This is a small SSD mounting adapter for my Synology DS218+. Theoretically this should also work for other "slot"-type drive cages.

Note that the latch is missing the little pin on the front.

Original source for the adapter plate: https://www.tinkercad.com/things/jHUGbb1cVdR

Original source for the latch: https://www.thingiverse.com/thing:4852787

Synology DS218+ SSD Adapter

Synology-SSD-Adapter.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community