Order summary

Buster Sword Apex x FF Mashup 3d model
Buster Sword Apex x FF Mashup

Price$19.99
Sales taxEnter address for total

Add promo code

Total dueEnter address for total

Powered by

Payment details

PayPal
Card
By confirming your purchase, you allow Thangs to charge your card for this payment in accordance with their terms.
Werner F

Buster Sword Apex x FF Mashup

by
WF3D
Follow
Follow
Remix Model
WF3D
WF3D
|
Image 1 of 7
Buster Sword Apex x FF Mashup 3d model
WF3D
WF3D
|
Image 1 of 7
Buster Sword Apex x FF Mashup 3d model
2D
3D
Makes
instagram-play
Buster Sword Apex x FF Mashup 3d model
Buster Sword Apex x FF Mashup 3d model
Buster Sword Apex x FF Mashup 3d model
Buster Sword Apex x FF Mashup 3d model
Buster Sword Apex x FF Mashup 3d model
Buster Sword Apex x FF Mashup 3d model
Buster Sword Apex x FF Mashup - Super fun build! Pretty much everything went together like a glove!  - 3d model
This model is restricted by licensing terms. 

This ready to print model is in total about 1,80 m long. It consists 62 individual pieces which are separated to be printed in the according colors.

I have implemted holes for a round rod / dowel. The lenght of each rod should be 900 mm.

So far I included two versions of rod 23 mm (watch out this is exactly 23mm as my dowels which sold as 23 mm diamater where undersized), and 20 mm. This one has +0,4 mm tolerance so you can slide it in easier. If you need another one please let me know!

I used M8 threaded rods for the prototype and I wouldnt recommend that as they bend a lot due to the weight. In the end I used 23 mm wooden dowels which were much stiffer!

Each file has the according color in the file name. If the file needs support I also included this in the file name. (There are only 3 files which need supports, all other files print support free!)

I will give you some estimates on how much filament you need for the print, as this can heavily vary on your print settings:

  • Gold: ~ 1kg
  • Brown: < 1kg
  • Black: < 2kg
  • Light grey: < 2kg
  • Mid grey: < 2kg I recommend printing the handle with 4 perimeters, this has the most stress. Go for more weight on the lower section on the sword and lower density / weight on the blade pieces, then it wont be as top heavy. You can do 2 perimeters and 5-8% infill for the blade pieces.

Update 28.05.: Added 24 mm dowel version :)

Please read the assembly instruction before assembly. ;)


19 Likes11 DownloadsJune 6, 2024


19 Likes11 DownloadsJune 6, 2024
This model is restricted by licensing terms.