This is a HueForge image of Bruce Lee from Enter The Dragon.
Printed on the Bambu Lab P1S.

The colors used in this print are basically Black, Grey, Beige, and White.
Slicing instructions and color change locations are listed below.

------------------------
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
	- PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	- PLA Paramount 3D Castle Limestone Gray Transmission Distance: 3
	- PLA BambuLab Basic Beige Transmission Distance: 8
	- PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
	- Start with Charcoal Black
	- At layer #18 (0.84mm) swap to Castle Limestone Gray
	- At layer #24 (1.08mm) swap to Beige
	- At layer #36 (1.56mm) swap to White for the rest.

------------------------
Hope you enjoy it.

The Legendary Bruce Lee

Bruce Lee_Front_200x200.stl

Stan "The Man" Lee

This is a Hueforge Print of Stan Lee. I got the image off Goggle image search. Not sure who took the original picture.

I have been a fan of Stan Lee for a long time and in learning how to use Hueforge I thought it would be cool to have a Hueforge print of him. So I tried to make one and this it what I came up with after quite a bit of slider adjustments within Hueforge and a lot of hesitations.
I am still learning Hueforge but of the few prints I created myself, this is the best one I have done to date. In fact I was taken back by how good this one came out on my first test print for it that I decided to leave it as is and want share it with others. I can not say that it is perfect but I do like it a lot and I am very pleased with how it came out. I hope that others can enjoy it as much as I am.

-----------------
I printed this on the Bambu Lab P1S using the Panda Revo hotend with a 0.4mm nozzle.

The print speeds I used for this print are listed in a Pic that I am also uploading with this project. They are the speeds suggested to me by others when printing Hueforge prints.

-----------------
These are the Describe settings listed by Hueforge:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
	  - PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	  - PLA+ Sunlu Grey Transmission Distance: 2
	  - PLA BambuLab Basic Beige Transmission Distance: 8
	  - PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
	  - Start with Charcoal Black
	  - At layer #13 (0.64mm) swap to Grey
	  - At layer #17 (0.8mm) swap to Beige
	  - At layer #24 (1.08mm) swap to White for the rest.

(Note: In HueForge I use the Sunlu PLA+ filament presets in place for eSun Filament. So the print you see in the Pics are maybe using eSun PLA+ filament for the Grey and White filaments.)

-----------------
Anyways... I hope you all enjoy this HueForge print.

Stan "The Man" Lee

Stan Lee_Front_200x200_Hueforge_project.3mf

HelloI am new to Thangs but have been 3D Printing for a few years now. I just want to say hello and that I hope you all enjoy the things I 3D Print and or Make.

 Hello I am new to Thangs but have been 3D Printing for a few years now. I just want to say hello and that I hope you all enjoy the things I 3D Print and or Make.

Hello

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

VectorRoll

Designer posts

Hello

Pinned models

Stan "The Man" Lee

The Legendary Bruce Lee

Stan "The Man" Lee