Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4884298.

This is a redesign of [_FoRTu_ BEKANT Table Headphone Hanger](https://www.thingiverse.com/thing:2887515) I had this hanger for my old Ikea Bekant table and was more than happy with it. 

Now I switch to a Neudoerfler Flux-E table which has a thicker table top so I wasn't able to use the original hanger any more.

To my knowledge this should fit all table which have a thickness of 2,5 cm (or 0,98 inch)
The opening in the back should fit most micro-USB plugs to fit through.

Neudoerfler Table Headphone Hanger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4234304.

I haven't had a good place to put my rolling pin in my kitchen so I decided to build me something to store it. So I came up with the idea of designing this simple tray to store it on my kitchen counter.

Rolling Pin Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3023380.

This is a simple corner bracket which i designed to fixate my printer to the platform it is sitting on.

The shorter side is    20,0 mm    (0.78 inch)
The longer side is     23,5 mm    (0.92 inch)
The hole is                  3,0 mm    (0.11 inch)

Simple corner bracket

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4013593.

Similar to the paper stand which comes with the game, this stand can be printed for each player to handle the players poles with more ease.

###TIP
Use a drill or exacto knife to get rid of any artifacts inside the holes, I at least had to do this.

### Design details
The included pdf contains all geometric information about the stand.

Menara Pole stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4834554.

My father in law asked me if I could model and print him the broken handle for his Jonsered 2040 Turbo chainsaw. Well I did and I thought that might anyone else could also use this.

In the picture you can see the original part (black) and the redesigned part (orange)

Jonsered 2040 Turbo chainsaw top handle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2947793.

Its just a simple loop to hold down some cables

Screw sizes
The holes to pin it down are made for 3 mm screws.

Cable Loop

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3023400.

This is a clamp designed to level your bed with the help of a dial gauge.

With this clamp you can attach the gauge to your hot-end (single and dual nozzle) and make sure your bed is level by a precision of 0,01mm.
The clamp is simply pushed onto the stock hot-end fan.

### Update

I have designed a new clamp to support the Steinle 3105 analog dial gauge. You now find two stls for the different dial gauges

* Neateck Clamp [1]
* Steinle 3105 Clamp [2]

See parts list for the links


Dial gauge clamp for Tevo Tarantula

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4039144.

A simple protection peace for the corners of the ikea alex container.

Ikea Alex corner protection

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

VDsoft

Achievements

Seedling