suited to Magura brakes.
Rohloff e14 trigger adaptor. 
moves the shift buttons to a more natural and safe place on the bars. 

no extra hardware required. 

Print settings:
no support 
material - any 
I have used pla, petg, nylon, asa and CFnylon.


Rohloff e14 Magura trigger adaptor

Rohloff e14 Magura trigger adaptor .3mf

the rock on a Hextraction tile.

watch him eat the balls and pop out brilliant ideas. 

Hextraction ROCK

HEX-ROCK

Added universal 18mm shaft adaptor after finding out Lightfoot are special 16mm. 

have you ever been a bit over using a bike pump to get those golf grips on your polo mallet? 
Has your hand ever become tired from gripping that 16mm Mallet? 

solutions ahoy! 

Polo shaft 16mm - bike grip 22.2mm adaptor. 

scale up the Z axis in your slicer for longer or shorter versions. 

You could even scale the XY to fit an old Brutus shaft too. or let me know and ill update a model. 

Printer:
Ultimaker S5 / Any

Settings:
rafts - Yes

supports NO

walls 2

infill 20% 

resolution - any .2~.3



material: PETG, Nylon.
- I have only tested these two materials but I can imagine just about any material will be fine. It's only under compressive load for the most part. 

Bike Polo Mallet shaft to bike grip adaptor

have you ever been a bit over using a bike pump to get those golf grips on your polo mallet? 
Has your hand ever become tired from gripping that 16mm Mallet? 

solutions ahoy! 

Polo shaft 16mm - bike grip 22.2mm adaptor. 

scale up the Z axis in your slicer for longer or shorter versions. 

You could even scale the XY to fit an old Brutus shaft too. or let me know and ill update a model. 

Bike Polo shaft to bike grip adaptor LW v4.stl

polo shaft to bike grip adaptor 18mm shaft v1.stl

Ever had a ball smash your valve off and wished you had those nice roger valve savers??  

Sick of the duct tape and zip tie look?

this will probably stop your valve from getting knocked off and look cool doing it. 

NEW: 
Presta V2 valve saver 
Schrader V1 valve saver

It's mostly friction fit. so no extra valve stem nuts are needed to hold it in place.
you could scale up the Z-axis if you want to make it taller + stronger... but heavier.

enjoy and have fun - print some pretty colorful ones and show how it looks on your bike! 

Printer:
Any

Material:
Any - I've used PC, Nylon, Nylon12, PETG, PET, and PLA so far. all work fine. 

Rafts:
No

Supports:
No

Resolution:
0.1mm ~0.3mm
anything is fine. 

Infill:
0

WALLS:
8

Notes:
this print is designed to be all walls and no infill. You can play with this if you want but I'm using all walls for strength. 
 

Bike Polo Valve saver V4.stl

Ever had a ball smash your valve off and wished you had those nice roger valve savers??  

Sick of the duct tape and zip tie look?

this will probably stop your valve from getting knocked off and look cool doing it. 

It's mostly friction fit. so no extra valve stem nuts are needed to hold it in place.
you could scale up the Z-axis if you want to make it taller + stronger... but heavier.

enjoy and have fun - print some pretty colorful ones and show how it looks on your bike! 

Printer:
Any

Material:
Any - I've used PC, Nylon, Nylon12, PETG, PET, and PLA so far. all work fine. 

Rafts:
No

Supports:
No

Resolution:
0.1mm ~0.3mm
anything is fine. 

Infill:
0

WALLS:
8

Notes:
this print is designed to be all walls and no infill. You can play with this if you want but I'm using all walls for strength. 
 

schrader valve saver V1.stl

Presta Valve saver v2.stl

I made this cover to stop my son from pressing buttons unsupervised. 

Print face down - any material 

I have included that Kobra inlay if you fancy getting multicolour. 

Kobra MAX screen cover V2

This is to stop my son from pressing buttons on the printer. 

simple screen cover - cool kobra on it. 

print face down to bed - any material. 
I've included the kobra extrude if you fancy getting multicolour prints. 


Kobra MAX screen cover V2.3mf

very simple tray with a few dividers that will fit under the front of the Anycubic Kobra MAX. 
I have provided the .STEP file if you want to play around with it in CAD.

Print Settings: basic
- Any material 
- no support 
- no adhesion 

Anycubic Kobra Max storage 

Anycubic Kobra MAX storage .stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Typical lachy

Achievements

Seedling

Voyager

Up and Coming