This is a gridfinity compatible gamegear cartridge holder

Gridfinity-GameGear-HolderShorter.stl

Gridfinity-GameGear-Holder.stl

This is a gridfinity compatible PSP UMD holder

Gridfinity PSP UMD Holder.stl

This is a gridfinity compatible PSP UMD holder



Gridfinity-PSP-UMD-HolderShorter.stl

This is a gridfinity compatible holder for storing game boy games it should also hold game boy Advanced games however I have a separate model with a different height available for that model

Gridfinity GBdmg Holder.stl

This is a gridfinity compatible holder for storing game boy advance games it should also hold game boy DMG color games however I have a separate model with a different height available for that model

Gridfinity GBA HolderShort.stl

Gridfinity GBdmg Holder-Short.stl

Gridfinity GBA Holder.stl

It clips in the mini holder and holds several for painting / batch painting

Citadel mini batchpaint holder

Cita Del mini batchpaint holder.stl

I created this to replace the stock limit switch holder 6mm to the right to allow my sprite drive clearance to reach the left most of the plate

Ender 3 X Axis limit switch

X limit switch bracket.stl

#HalloWearable, #HalloWearables
This top hat splits down the middle for secret storage

The Split files are printable on a normal sized printer, 200 mm bed. They are named by the orientation they will be in the final assembly. If you have a ~250+mm bed you can use the full size parts except for the Brim, its 320mm wide.

You will need to print out 1 full part or 4 quarters for each part (LowerBodySE+LowerBodySW+LowerBodyNW+LowerBodyNE). You'll need a brim, lower body, lower ring, upper ring, upper body and the 2 hinge parts. 
If you would like to not use the hinge, please print out 2X of the Upper and Lower Ring SW & SE then use 12 magnets instead.

From top to bottom the parts are Brim, LowerBody, LowerRing, Hinges(parts A and B), UpperRing, UpperBody

For the inside of the hinge I used 2 lengths of the same filament glued in. 

These are the magnets I used:  https://www.amazon.com/gp/product/B07KZQGWNN
These will press fit in, glue is optional.


Print instructions: I printed everything with default settings on my Ender 3, however I used a 1 mm nozzle for speed purposes. Everything should print well with a .4 mm though. Supports are only needed for the Lower body part(s). Estimated time with 1.0 nozzle: 60-70 hours total, with .4mm... GLHF, at least 120 hours for a single printer.

Finished assembly photos: https://imgur.com/a/HsHxUKr

Hat-trick Tophat #Hallowearable #Hallowearables

Brim.stl

Hallowearables_Full.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Tynster

Achievements

Seedling

Explorer