Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2874051.

These are storage / display / transport trays for Star Wars: Legion miniatures.

You will need:

- washers/small coins (2 c€nts in my case)
- magnets to hold the miniatures. I used 5mmx2mm N52 magnets with about 650g strength
- magnets for the underside if you want to put them into a suitcase (I used 8mmx3mm - unknown strength)

The trays will stack and held together by the corners and magnets in the underside.
During play there is room for the command token to go in to if you use coin capsules like I do (36mm). The coinholder will double as a grip to get hold the trays and pull them out of my suitcase solution.

BE AWARE: 
Since I didn't build the AT-RT yet the version of its tray is untested. 
The AT-ST tray is in the works but hard to figure out.

Star Wars Legion Unit Trays

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4179231.

Did a remix of some Arkham Horror LCG Tokens by "praabjerg" to fit my Investigator Trays (https://www.thingiverse.com/thing:2902335).

Arkham Horror LCG Tokens for Investigator Trays

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2902335.

After printing some resource and clue tokens from user "praabjerg" (see remixes for his tokens) I redesigned the clue token to make it simpler - after playing with them for a while and seeing acrylic investigator trays pop up over etsy and ebay I decided to design a tray for myself trying to fit the tokens.

Here is the result. I didn't like the health and sanity tokens and couldn't come up with my own so I just added a general area to put the cardboard tokens.

Printed clue and resource tokens on 100% infill (they are so small it doesn't make a real difference) and the tray at 50% infill (again - doesnt make a huge difference going done because of the small height of the whole tray (2mm in low areas, 4mm on the edges). Used a brimm to get the tray of without bending it when pulling of (make sure the print isn't to hot and/or flaten in back down on the still hot headbed).

Hope you enjoy it. Let me know if you have any suggestions to improve on them!

Arkham Horror LCG Investigator Trays with Tokens

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4962778.

The goal was to reduce the amount of tokens for the game "Imperium Classics" / "Imperium Legends". So I came up with this counter for the 3 types of resources.

Left of the icons you will count the multiple of tens you have of the type, and left of it you can count single resources.

I wanted to use D6 dice because they dont bump over as easily as D10s.

The icons for the resources are tokens from the game that i glued in. You will have to cut the victory point token with a sharp knife to make it fit. The original size of the token was to big for my liking.

I used self-adhesive felt to make it feel more "royal" as seemed fitting for a Empire-themed game.

As a finishing touch I will put resin over the tokens and fill the small gaps with it, to give it a lasting finish.

Imperium Classics and Legends Resource Counter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4099377.

Created some Token Trays for Heroes, Villians and Schemes in the Marvel Champions LCG by FFG.

The Tokens I used are from Buythesametoken.

Token Trays for Marvel Champions 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

Torian

Star Wars Legion Unit Trays

Arkham Horror LCG Tokens for Investigator Trays

Arkham Horror LCG Investigator Trays with Tokens

Imperium Classics and Legends Resource Counter

Token Trays for Marvel Champions