tracking pixel
Profile Image
Toprototyp
Toprototyp

Toprototyp

Hello! :)

I mainly design interior decorations and useful everyday objects.

As a member, you'll get access to my ever-growing database of designs. Being a member gives you rights to print and sell physical objects based on my models.

Follow

Select a membership plan

Model is included in this plan
Available now

ALL INCLUSIVE
$10.00
/ month

Becoming a member of this plan gives you an access to all of my published models. Feel free to print and sell them. I'll be happy to help you with any doubts regarding my designs :)

Piotr K

PARALLETTES

by
Toprototyp
Follow
Follow
Remix Model
Toprototyp
Toprototyp
|
Image 1 of 5
PARALLETTES 3d model
Toprototyp
Toprototyp
|
Image 1 of 5
PARALLETTES 3d model
2D
3D
Makes
PARALLETTES 3d model
PARALLETTES 3d model
PARALLETTES 3d model
PARALLETTES 3d model
PARALLETTES 3d model

Do you lack exercise equipment at home? Say no more!

I designed those parallettes (push up bars) for every calisthenics enthusiast. All you need to do is to print the parts, drill a few holes and assemble everything together. Remember - summer is coming!

What you will need:

  • 4x "Parallettes - - 3MF or STL"
  • 12x countersunk wood screw - ⌀4x20 (⌀4,5 or ⌀5 will also work),
  • 2x ⌀35±0,3, 500mm long round dowels (basically a wooden bar) - I strongly recommend to use high quality material, like beechwood, because of it's stiffness and aesthetics)
  • a drill with ⌀3,5, ⌀4 or ⌀4,5 drill bit (chose a drill a little bit smaller than your countersunk screws).

Assembly instructions:

  • carefully measure your dowels first; I have prepared a few variations of the design so you can choose a best fitting one: "Parallettes - fi34,8 - 3MF" - dowel size: ⌀34,3±0,2 mm "Parallettes - fi35,3 - 3MF" - dowel size: ⌀34,8±0,2 mm "Parallettes - fi35,6 - 3MF" - dowel size: ⌀35,3±0,2 mm

(mine dowels measured exactly ⌀35mm and I used "Parallettes - fi35,3 - 3MF", I had to use some force to assembly the parts together, but now the whole design is very stiff and sturdy).

  • print the parts of the appropriate size (you don't need to use supports, parts are oriented correctly),
  • insert dowels into printed parts,
  • drill holes in dowels - you don't have to remove printed parts before drilling, holes are big enough to fit a ⌀4,5 drill bit,
  • connect printed parts and dowels by screwing them together with countersunk wood screws.

And that's it! You are ready to do some push ups, or even handstands!

Tips for printing this model:

  • orientation: all uploaded files are in the correct orientation,
  • scale: I do not recommend to scale the design because wooden dowels smaller than ⌀35 might be not stiff enough to support your bodyweight,
  • temperatures: depending on the material used and the manufacturer's guidelines,
  • layer height: 0.2mm or less,
  • number of outlines: 2 or more,
  • infill: 15% or greater,
  • brim: not required,
  • supports: not required,

13 Likes3 DownloadsJanuary 4, 2024