3D printing is not only about toys, it is also about aesthetically pleasing everyday objects and interior decorations. In the case of this stand - it is a combination of both.

Tips for printing this model:
- orientation: all uploaded files are in the correct orientation,
- scale: scale the model as desired,
- temperatures: depending on the material used and the manufacturer's guidelines,
- layer height: 0.2mm or less,
- number of outlines: 2 or more,
- infill: 15% or greater,
- brim: not required,
- supports: not required,

JEWELRY STAND

090122-01-000-JEWELRY HOLDER.3mf

This wave pattern vase will be a great, useful decoration in your kitchen!

Tips for printing this model:
- orientation: all uploaded files are in the correct orientation,
- scale: scale the model as desired,
- temperatures: depending on the material used and the manufacturer's guidelines,
- layer height: 0.2mm or less,
- number of outlines: 2 or more,
- infill: 15% or greater,
- brim: not required,
- supports: not required,


WAVE PATTERN VASE 1

12072023-01-000-WAVE PATTERN VASE.3mf

Do you happen to overflow your plants? If so, a pot with a tray will help you solve this problem - in case of overflow, the excess water will drain into the tray.

This planter consists of two parts - its lower part is the water tray, while the upper part is the pot, which has holes to drain excess water. If you happen to overflow your plant, just pour the water out of the tray and you're done!

Tips for printing this model:
- orientation: all uploaded files are in the correct orientation,
- scale: scale the model as desired,
- temperatures: depending on the material used and the manufacturer's guidelines,
- layer height: 0.2mm or less,
- number of outlines: 2 or more,
- infill: 15% or greater,
- brim: not required,
- supports: not required,

WAVE ALOE PLANTER

020823-01-001-PLANTER.3mf

020823-01-001-PLANTER.stl

Need something for change from the depths of your pockets, but the traditional piggy bank look doesn't quite appeal to you? I had the same, and this piggy bank has served me for a couple of nice years now.

Tips for printing this model:
- orientation: all uploaded files are in the correct orientation,
- scale: scale the model as desired,
- temperatures: depending on the material used and the manufacturer's guidelines,
- layer height: 0.2mm or less,
- number of outlines: 2 or more,
- infill: 15% or greater,
- brim: not required,
- supports: not required,

HEXAGONAL PIGGY BANK

101021-01-001-BODY.stl

Becoming a member of this plan gives you an access to all of my published models. Feel free to print and sell them.
I'll be happy to help you with any doubts regarding my designs :)


ALL INCLUSIVE

This pen holder combines simple geometric shapes with organic patterns. It will be great for modern interiors, where minimalism dominates.

Here are some tips that might be helpful while printing this model:
- orientation: all uploaded files are in the correct orientation,
- scale: scale the model as desired,
- temperatures: follow your filament manufacturer's guidelines,
- layer height: 0.2mm or less,
- number of outlines: 2 or more,
- infill: 15% or greater,
- brim: not required,
- supports: not required,

VORONOI PEN HOLDER

250424-01-001-VORONOI PEN HOLDER.3mf

250424-01-001-VORONOI PEN HOLDER.stl

A cubed shaped variation of my voronoi themed organizers.

VORONOI PATTERN CONTAINER

080724-01-000-VORONOI PATTERN CONTAINER.3mf

Hey there! I want to show you a lampshade with an organic texture that looks like rocks. It comes in two parts and needs very little material to print – you’ve got to check it out!

Here’s what you’ll need:

- The base "060524-01-001-BASE" which acts as the frame and has a hole for mounting an E27 bulb socket,
- The shade "060524-01-002-DIFFUSOR" which should be printed in vase mode with a wall thickness of 0.6mm (you can do this with a 0.4mm nozzle, so no need to switch to a bigger one),

Putting it together is super easy:

- Print all the parts included,
- Gently press the shade into the slots on the base – no glue required.

And there you have it!

VORONOI PATTERN LAMPSHADE

060524-01-001-BASE.3mf

060524-01-002-DIFFUSOR.3mf

Hello!

I’m introducing a project for a two-part plant pot cover. There are many similar projects available online, but I wanted to create my own. This led to the development of a rotating fastening system, and this is my first public project that uses it.

The cover consists of two parts:

    220624-04-001-TRAY – a drip tray that protects your plants from overwatering,

    220624-04-002-PLANTER – the main cover, inside of which the plant pot can be placed. The drainage holes in the cover allow for safe removal of excess water into the tray in case of overwatering.

The cover connects to the tray using an integrated “twist and click” mechanism. The tolerances are adjusted so that you can feel a satisfying resistance when turning the cover to release it.

The internal diameter of the cover is 130 mm, and the height is 90 mm. Scaling the elements may result in the clip not functioning properly!

If you like my project, be sure to check my profile - you will find a lot of useful models there!

IONIC COLUMN TWIST-OFF PLANTER

220624-04-001-TRAY.stl

220624-04-002-PLANTER.stl

Hello! :)

I mainly design interior decorations and useful everyday objects. 

As a member, you'll get access to my ever-growing database of designs. Being a member gives you rights to print and sell physical objects based on my models.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Toprototyp

Achievements

Sapling

Fan Favorite

Pinned models