Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5023345.

Hi,

This toothpaste creation is a mix of things that are not allowed to be mixed together. The fitting mounts on Colgate toothpaste.

The nose is very practical because you can put toothpaste on 2 toothbrushes at once instead of the original slow way. Or you are more a let's clean up that nose with my toothbrush kind of guy.

Vid about it and me: https://youtu.be/UY__uRUipFg

Nose Toothpaste

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4968792.

<h1> Hi! </h1>
I made this lovely sugar pot but you can also store more into the pot like plants or whatever you like!
<h2> If you make it please share your pictures!! </h2>
<h2> Printing settings </h2>
Make sure that you use supports on the print for the parts like the rings on the side of the pot. I used some support blockers in my slicer to prevent unnecessary printing of supports. 

<h2> Inspiration </h2>
This is a pot I made inspired by the work of Matteo Thun that he did for Illy coffee. 

Sugar Pot 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4963267.

<h1> Arduino Uno super speed case </h1>
This case makes your Arduino perform <b> 2 times the speeds </b> it normally does. It is a 3 piece set that you can print without supports. This case only supports Arduino Uno type of microcontrollers.

For a more permanent fitting, you can use glue to attach the spoiler more firmly. You can also buy some flaming stickers to overclocker your Arduino another time. 

Arduino Uno Spoiler Case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5071801.

For the Max Verstappen fans,

You can use white pla or transparent for the diffuser panels. For the assembly, you can use some glue to stick the diffuser panels more firm on the casing.

I used some Neopixel ws2128b led strips chopped in pieces (9 individual LEDs) and placed them inside the casing. Then I soldered some wires through them and you have an exit point on the side of the panel where you can connect it with a microcontroller.

Max Verstappen Led Panel

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4938640.

<h1> Button hook </h1>
<h3> No support needed </h3>
I hope you like it. I printed it out in matte black and advise you to do that too because it is beautiful. 

<h3> Rubber band </h3>
You will need a rubber band that is 8 mm wide. It will be a tight fit but it works. It also works with a smaller width rubberband but it will be less clean.

<h3> How to mount </h3>
You can use a screw to mount it to the wall and glue the button and mount for a good permanent fit. They fit together without glue but there is a chance that it will fall off. 

<h3> I made a tutorial video </h3>
Check out this video and you will see how I assemble it. And to know know more about my work <3 <a href="https://youtu.be/2qz1lZoq6kQ"> video</a> 

Button wall hook

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4862274.

This is for a bigger servo than the standard 9g blue servo. 

11g Servo Holder / Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4646929.

There are a lot of servo fittings on the splines for 9kg servos. But there is a lack of 11kg servo fittings so here is the basic arm and just the round piece to remix. 

Be aware to use it for a servo LIKE the MG995 or MG996. Because they have higher torque the spline is bigger. 

11g Servo arm fitting 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4971307.

This is a cooling fan setup for the cr-200B that I have. The extruder gears got too hot and with this setup I cool them with a fan. The design can be easily clicked on and of and that makes swapping filament more accessible. 

The fan is a E3D Ventilator | 12V | 30x30x10 mm. It fits in there without glue but you can make it more solid with some hot glue on the sides. I have a 9 Volt / 2A  power brick with a splitter that I plug in to activate the fan. 

Creality Cr200B Cooler fan holder

<p dir="ltr"><span style="white-space: pre-wrap;">Hello everyone! I'm delighted to share my joy at the growing popularity of my Jumpy models! Excitingly, there are many more to come in the future. Wishing every one of you a very Merry Christmas!</span></p>

 Hello everyone! I'm delighted to share my joy at the growing popularity of my Jumpy models! Excitingly, there are many more to come in the future. Wishing every one of you a very Merry Christmas!

I wish you all a Happy Jumpy Christmas!

All 3D printing sales will be the responsibility of the seller.

**COMMERCIAL USE LICENSE**  You get a Commercial Use License that allows you to sell our printed models. Please read the Terms &amp; Conditions below.

Terms &amp; Conditions

You are NOT allowed to sell or share any digital file you get from us. You are only allowed to sell the 3D printed models.

You are NOT allowed to make molds or mass-produce our models.

You have to credit Tomodesigns as artists and mention our Patreon page as the source of the models.

The Commercial Use License is only valid as long as you remain subscribed to a tier that provides a commercial license. After losing the Commercial Use License, you have to immediately stop selling our printed models.

I appreciate your Support - Thank you!

3D Print Sale

Introducing the Jumpy Tree, a 3D printable toy that brings a touch of nature's magic to your playtime. Watch in delight as this playful companion jumps back up when you push it down. You can also download his brother tree [here](https://thangs.com/designer/TomoDesigns/3d-model/Jumpy%20Tree-971686?manualModelView=true&source=Recent)

He is a 2 part Tree that you can print without any supports. It is a snap-fit.

Cool filament? You can buy it [Basics PLA Green, Matt Latte Brown](href="https://shareasale.com/r.cfm?b=2354730&u=3991419&m=138211&urllink=&afftrack=") [White](https://amzn.to/3JI91K7) 

**Every make will be featured on my Instagram add your handle and follow me :)** Follow [my Instagram](https://www.instagram.com/tomo_designs/) if you want to see more designs like this or if you have questions!

**You can also become a seller of all my designs. Check out my [Patreon!](https://www.patreon.com/TomoDesigns/)**

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND

Jumpy Tree

Feet Spring.stl

Jumpy Tree 1.stl

Jumpy Tree 1 All Parts.3mf

A unique and eye-catching way to remind you to keep your plants hydrated and healthy. This flower pot, shaped like a little man with a middle finger, is sure to catch your attention every time you see it. Whether placed on your desk at work or displayed in your home, this pot is sure to bring a smile to your face and serve as a constant reminder to care for your plants.

This is sort of the v2 of my middle finger happy pot original design. I've made some exciting improvements to the Middle Finger Happy Pot by giving it more realistic hands.

Cool filament? You can buy it [here!](https://www.amazon.com/Polymaker-Marble-Filament-1-75mm-Carton/dp/B096XFLFYF?crid=3GRF34XZCJLOU&keywords=marble%2Bpla&qid=1673976405&sprefix=marble%2Bpl,aps,261&sr=8-1-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzQzFHOVVEOUtLUjQ5JmVuY3J5cHRlZElkPUEwMDM1NTQzRVlGNlBURUJWOVE2JmVuY3J5cHRlZEFkSWQ9QTA0NjMzODdZQlZIVjZTMFFUUFomd2lkZ2V0TmFtZT1zcF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl&th=1&linkCode=sl1&tag=tomodesigns05-20&linkId=246f24ab185477a5233e5945d1c9cdf9&language=en_US&ref_=as_li_ss_tl)

**Every make will be featured on my Instagram add your handle and follow me :)** Check out [my Instagram](https://www.instagram.com/tomo_designs/) if you want to see more designs like this or if you have questions!

**You can also become a seller of all my designs. Check out my [Patreon](https://www.patreon.com/TomoDesigns/) for a commercial license.**

Middle Finger Pot with Feet

Middle finger pot V2 with Feet.stl

Introducing the Mini Heart Happy Pot - a charming 3D printable model that brings love and joy to any setting. This model features a heart sign with his hands, showcasing its cheerful personality. Perfect for decorating your home or as a gift for a loved one, the Happy Heart sitting pot is sure to spread happiness wherever it goes. 

It is print in place so no trouble with assembly. You don't need any supports either!

I used this material: [Marble PLA](https://www.amazon.com/ELEGOO-Filament-Dimensional-Accuracy-Cardboard/dp/B0C8HWQYXF?crid=2EH7H1P0URZID&keywords=marble%2BPLA&qid=1706454630&sprefix=marble%2Bpla%2Caps%2C211&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1&linkCode=sl1&tag=tomodesigns05-20&linkId=baf1dee630ae2d5e277f8dc3535e71b1&language=en_US&ref_=as_li_ss_tl)

Check out my [Instagram](https://www.instagram.com/tomo_designs/) if you want to see more designs like this or if you have questions!

Do you want to support me or become a reseller of my designs? Go take a look at my [Patreon!](https://www.patreon.com/TomoDesigns)

Mini Heart Happy Pot

Face.stl

Mini Heart Happy Pot.stl

**Introduction**

[See The Video About The Design Here!](https://youtube.com/shorts/42qahnPZ5Tg)

This is Joy Fidget V2.0, the successor to the original Joy Fidget. In this version, I have made significant enhancements, particularly to the clicking mechanism. Gone are the days of the original flawed click-in mechanism; instead, I've implemented a threaded mechanism that is more reliable during printing on all of your machines.

Additionally, I've redesigned the bottom to improve ergonomics, making it even more comfortable to hold. As an extra, I'm including the original threads, facilitating the creation of Remixed bottoms for those who prefer something else.

**Printing Tips**

Sometimes the tolerance between the threads is too small because of the Z-Seam. Make sure that you put it on random to prevent this struggle.
Infill around 25% will work fine. The more infill the stiffer your spring gets.
I used this material: [PLA Red/Black/White](https://amzn.to/3Tj2rQg)

Check out my [Instagram](https://www.instagram.com/tomo_designs/) if you want to see more designs like this or if you have questions!

Do you want to support me or become a reseller of my designs? Go take a look at my [Patreon!](https://www.patreon.com/TomoDesigns)

Joy Fidget 2.0

Bottom.stl

JoyFidget Full Set.stl

Thread.stl

Top.stl

Hi there I am a designer that loves to make random things. You can support me by following my Instagram! https://www.instagram.com/tomo_designs/
If you want to support me or sell my designs check out my Patreon
https://www.patreon.com/TomoDesigns

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

TomoDesigns

Designer posts