I'm working my way through Pathfinder's unique selection of combat-able creatures, especially those other model-makers haven't taken a swing at. This is what I've got so far.

Pathfinder Creatures

My rendition of a [Cactus Leshy from Pathfinder ](https://2e.aonprd.com/Monsters.aspx?ID=1219)

This should print well with resin. Regarding FDM, you can probably still get it to print but you'll likely lose a lot of the spike detailing

Cactus Leshy - Pathfinder Creature

CactusLeshy2.stl

My take on the [Nyktera from Pathfinder](https://2e.aonprd.com/Monsters.aspx?ID=1321)
This is a fairly small print, as Nyktera are considered tiny. A resin printer can likely handle it, but I really can't say if FDM will be able to print this.

Nyktera - Pathfinder Creature

Nyktera.stl

A premium version of my Levaloch. The provided stl has double the resolution, and the included .blend file has the original model, for any of your tweaking needs.

Premium Levaloch (High Res Model & .Blend Source File)

Levaloch1.stl

My rendition of a [Levaloch (Warmonger Devil) from Pathfinder ](https://2e.aonprd.com/Monsters.aspx?ID=1114)

This should print well with resin, but I haven't tried to optimize it much for fdm.

[I've also released a high-res version, complete with access to the original .blend](https://thangs.com/designer/Tinarkii/3d-model/Premium%20Levaloch%20%28High%20Res%20Model%20%26%20.Blend%20Source%20File%29-1103055?image=1424923)

Levaloch (Warmonger Devil) - Pathfinder Creature

Levaloch_LowerRes.stl

My take on the [Gibtas Bounder from Pathfinder](https://2e.aonprd.com/Monsters.aspx?ID=1045)
This should print well in resin, but I haven't tried to print it on an fdm.

Gibtas Bounder - Pathfinder Creature

Gibtas Bounder.stl

A premium version of my destrachan. The provided stl has double the resolution, and the included .blend file has the original rigged model, for any of your tweaking needs.

Premium Destrachan (High Res Model & .Blend Source File)

Destrachan.blend

My rendition of a [Destrachan from Pathfinder ](https://2e.aonprd.com/Monsters.aspx?ID=605)

This should print well with resin, but you might have some difficulty with the ears and claws printing fdm.

[A higher res model and access to the .blend source file is available here for a fee](https://thangs.com/designer/Tinarkii/3d-model/Premium%20Destrachan%20%28High%20Res%20Model%20%26%20-1064431)

Destrachan - Pathfinder Creature

Destrachan3.stl

Allow me to tell you the tale of 9 adventurers. Though they had little in common with each other, and even less familiarity, fate would bring them together on the eve of a great celebration to fight off a deadly foe. Only their triumph could bring peace and safety back to the land.

Woodland Warriors

Ash Bowman is a sailor by trade, and as such she has been through many a harrowing experience. Her quick thinking and nimble feet have kept her alive through those moments, and in turn she has picked up a thing or two in the way of fighting. Though a skunk, she prefers to infuriate her foes with her words rather than her... other qualities.

This should print in resin fine, but may struggle on an fdm printer.

Skunk Woodland Warrior - PC

Skunk V1.stl

Hunter was only a young ratling when his family was taken away from him by a dastardly fox. Since that day, he has done everything in his power to track down the fox responsible, and kill her. He carries around the skull of a fox - a close family member of one he's hunting, as a warning to any who would seek to cross him.

This model should print well on a resin printer, but may need a little bit of up-scaling if you want to print this on an fdm printer.

Rat Woodland Warrior - PC

Rat V1.stl

Ozark is a kooky old hermit who prefers to keep to himself, enjoying only the company of his lightning-bug familiar. His time alone has given him plenty of opportunity to learn the mystic arts of witchcraft, which he uses to great affect when necessary.

I'd recommend printing with a resin printer if you have it, though he should print with fdm without too much difficulty.

Otter Woodland Warrior - PC

Otter V1.stl

Faux the fox prefers life in the woods rather than polite society. She makes due hunting for prey and living the life of a ranger.

This model is designed to print with a resin printer, but may also print on an fdm.

Fox Woodland Warrior - PC

Fox V1.stl

Officially, Risu is a diplomat from a nation across the sea. Unofficially, she is a spy for her government, hoping to gather intel, barter deals, and turn coats in the nations she visits.

This should print fine with resin, and I wouldn't recommend trying fdm with this one. The squirrel has some very thin features.

Flying Squirrel Woodland Warrior - PC

Flying Squirrel V1.stl

Due to Selina's ancestry, she was never accepted into regular society. Rather, many "decent" folk always presumed she was up to no good whenever they caught sight of her. Instead of trying to dodge these assumptions, Selina chose to lean into them, and developed the keen abilities of a rogue and ruffian.

This print should work with a resin printer just fine, and might work alright with an fdm.

Bobcat Woodland Warrior - PC

Bobcat V1.stl

Boban Sawyer the Beaver Builder is a tradesman first and foremost. He loves to help around town with all assortments of jobs needing doing, whether that's plumbing, lumbar, or something else entirely. He also moonlights with the town guard, and has dedicated himself to a practice of honorable combat to better help in that role.

This model was designed for printing with a resin setup, so you may run into trouble printing this with an fdm setup.

Beaver Woodland Warrior - PC

Beaver V1.stl

Berk the Wolverine barbarian has lived a harsh life. That's the only kind the cold north provides, which is where he calls home. Resources are sparse there, so he has learned to be a capable and effective fighter using only his own natural weaponry.

This was designed to print with resin, but may be able to be printed fdm as well.

Wolverine Woodland Warrior - PC

Wolverine V1.stl

This little barbarian is named Sofa Barn Table. As a young tanuki, she became fixated on big things, and the biggest things she first discovered were the family sofa, barn, and table - hence her name. Now an adult, she wields her over-large maul that she has named Darth!

This model should print in resin just fine, but may struggle when printed on an fdm printer.

Tanuki Woodland Warrior - PC

Tanuki V1.stl

This little fella is best printed on a resin printer, but you could probably get a version of him printed on an fdm.

Potted Plant Fellow - Leif Erikson

Leif Erikson Body.stl

A couple low-poly armored soldiers I whipped up for a game a few years back. They may need some supports to print properly but should work on fdm and resin printers

Soldiers- Low Poly

Paladins.stl

This set of models is detailed and should print well on most quality fdm printers as well as all resin printers. Supports will need to be generated.

Male Ranger: 3 Poses

MaleRangerCloaked.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Tinarkii

Achievements

Seedling

Debutant