Low Poly Eevee | Pokemon 3D Model

**Low Poly Eevee Model
**
I present my first go at a Low Poly Pokemon! I plan to do many other Pokemon (specifically the originals) and figured who better to start off with than Eevee.

Dimensions: 50mm (X) x 30mm (Y) x 50mm (Z)
Approximate Print Time: 1.5-2 hours depending on settings

I decided to create my own series of Low Poly Pokemon to add to the already amazing selection already available by other designers.

This is somewhat of a start to an ongoing exercise for me to improve with Low Poly modeling and mesh manipulation in Blender, but my overall goal is to capture unique poses and positions with as many Pokemon as I can!

Feel free to give me a follow to catch the next releases, and tag me on Instagram @thinair3dprints. I would love to see your print!

This file is uploaded with a non-commercial license, but if you wish to sell this or my other designs you can join my Patreon!

Patreon.com/thinair3d

**3D Printer Setting Used:
**
I suggest using whatever standard settings work best for you for simple decorative pieces, the model prints very easily. Here are the particular settings I used:

Nozzle Size: 0.6
Layer Height: 0.2
Infill: 5% (Adaptive Cubic)
Perimeters: 2
Support: None

Scaling: I would suggest only scaling up, but not scaling down any further, otherwise you may have issues with the ears being too thin.

You can lower your Layer Height to get better quality than the 0.2 LH I used!

Low Poly Jolteon | Pokemon 3D Model

Low Poly Jolteon Model

This is my second attempt at a Low Poly Pokemon! I created Eevee first, and have plans to create as many Pokemon as I can over the course of time.

This model is scaled as small as I wanted to print it (FDM), but can be scaled as you please (just be careful going smaller)! I also have a planter version of this model available to my Patreon supporters.

This is somewhat of a start to an ongoing exercise for me to improve with Low Poly modeling and mesh manipulation in Blender, but my overall goal is to capture unique poses and positions with as many Pokemon as I can!

Feel free to give me a follow to catch the next releases, and tag me on Instagram @thinair3dprints. I would love to see your print!

This file is uploaded with a non-commercial license, but if you wish to sell this or my other designs you can join my Patreon!

Patreon.com/thinair3d

3d Printing Setting used:
I suggest using whatever standard settings work best for you for simple decorative pieces, the model prints very easily. Here are the particular settings I used:

Nozzle Size: 0.6
Layer Height: 0.28
Infill: 5% (Adaptive Cubic)
Perimeters: 2
Support: None

Scaling: I would suggest only scaling up, but not scaling down any further, otherwise you may have issues with the ears being too thin.

You can lower your Layer Height to get better quality than the 0.28 LH I used!

Theta Coin

Theta Coin v1 (2 sided).stl

Low Poly Heart

Low Poly Heart

Just a simple low poly heart model.  Will need supports to hold it up.

You do not have the rights to commercially sell prints of this design.  If you would like commercial rights to sell any of my designs you can consider joining my Patreon.

Patreon.com/thinair3d

Voronoi Heart

Just a simple heart with a Voronoi Pattern

This model can be printed on both FDM and Resin.  It will need supports to hold it up, but the Voronoi patterns them selves (the holes) will not need to be supported).

Downloading this file does not grant you rights to sell prints of it commercially.  If you are interested in commercially selling my designs you can consider my Patreon.  

Patreon.com/thinair3D

Heart (Voronoi Pattern)

Rocknic (The Rock + Sonic the Hedgehog)

Rocknic

This model will need supports.

Remixed from:

https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://www.thingiverse.com/thing:2178466

Size: 64 x 65 x 100 

If you would like to support my work, or have access to ALL of my files you can consider joining my Patreon!

patreon.com/thinair3D

Rocktimus Prime (The Rock + Optimus Prime)

Rocktimus Prime

This model will need supports.

Remixed from:

https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://www.thingiverse.com/thing:3834046

Size: 89 x 149 x 134

If you would like to support my work, or have access to ALL of my files you can consider joining my Patreon!

patreon.com/thinair3D

Pickle Rock (Pickle Rick + The Rock) 

Pickle Rock

This model will need supports.  I printed it vertically with supports just on the bottom to hold the model up.

Remixed from:

https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://www.thingiverse.com/thing:2360230

Size: 65 x 74 x 196.  Scale up or down as you please. 

If you would like to support my work, or have access to ALL of my files you can consider joining my Patreon!

patreon.com/thinair3D

Rockdeer (The Rock + Reindeer) - No Supports

Rockdeer

Remixed from:

https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://www.thingiverse.com/thing:1203313

Size: 145 x 98 x 175

The antlers are already really difficult to print, so scale down at your own risk!

If you would like to support my work, or have access to ALL of my files you can consider joining my Patreon!

patreon.com/thinair3D

Totorock (The Rock + My Neighbor Totoro) - Support Free

Totorock (The Rock + My Neighbor Totoro Mashup) - No Supports Needed

Remixed from:

https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://www.thingiverse.com/thing:2855260

Size: 118 x 73 x 124

If you would like to support my work, or have access to all of my files you can consider joining my Patreon!

patreon.com/thinair3D


Mike Rockzowski (Mike Wazowski + The Rock) - Support Free

Mike Rockzowski (Support Free)

Remixed from:

https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://www.thingiverse.com/thing:1088238

Size: 80 x 83 x 35

If you would like to support my work, or have access to ALL of my files you can consider joining my Patreon!

patreon.com/thinair3D

Rockzilla (Godzilla + The Rock) - Support Free

Rockzilla (No Supports Needed)

Remixed from:

https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://www.thingiverse.com/thing:4391646

Size: 109 x 132 x 148

If you would like to support my work, or have access to ALL of my files you can consider joining my Patreon!

patreon.com/thinair3D

Shrock (Shred + The Rock Mashup)

Shrock

Remixed from:

https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://www.thingiverse.com/thing:2871042

Size: 74 x 73 x 78

Supports needed under the chin, but can be blocked everywhere else!  I have included a photo of what my supports looked like. 

If you would like to support my work, or have access to all of my files you can consider joining my Patreon!

patreon.com/thinair3D

Rockodile (The Rock + Crocodile)

Rockodile

Remixed from:

https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://cults3d.com/en/3d-model/art/happy-crocodile

Size: 129 x 83 x 133

If you would like to support my work, or have access to all of my files you can consider joining my Patreon!

patreon.com/thinair3D

Georock (The Rock + Geodude)

Georock

A simple mashup for the people.

Remixed from:

https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://www.thingiverse.com/thing:205699
Size: 137 x 62 x 42

If you would like to support my work, or have access to all of my files you can consider my Patreon!

patreon.com/thinair3D

Arocknid (The Rock + Gizo The Spider)

The Arocknid

A simple mashup for the people.

Remixed from:
1) https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson
&
2) https://www.thingiverse.com/thing:5044727

Size: 126 x 110 x 92

If you would like to support my work, or have access to all of my files you can consider my Patreon!

patreon.com/thinair3D

Grock (Groot + The Rock Mashup)

**Grock**

Another mashup for fans of The Rock.

Remixed from:
1) https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson
&
2) https://www.thingiverse.com/thing:2840339

Size: 128 x 83 x 133 (Scale up or down as you please)

If you would like to support my work, or have access to all of my files you can consider my Patreon! I also tend to drop these models to my Patrons earlier than everywhere else.

patreon.com/thinair3D

Rockgu (The Rock + Grogu Mashup)

**Rockgu**

Another mashup for fans of The Rock.

Remixed from:
1) https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson
&
2) https://www.thingiverse.com/thing:4065967

Size: 113 x 66 x 100 (Scale up or down as you please)

If you would like to support my work, or have access to all of my files you can consider my Patreon!

patreon.com/thinair3D

FDM or Resin

Supports: Yes (for the ears, none needed anywhere else). I have included a photo of what my supports looked like.

Infill: 10-15%
Perimeters: 2

Approx Print Time: 5 hrs

TyrockasaurusRex.stl

**The Tyrockosaurus Rex**

A simple mashup for the people.

Remixed from:
1) https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson
&
2) https://www.thingiverse.com/thing:1451797

Size: 68 x 75 x 100

Hey everyone!I've got a small update/fix I've made to the Annoying Easter Egg! One of our members shared an issue they had after printing. They filled the design with candy, and it ended up getting crushed due to the orientation of the threaded portions of the egg.I have swapped the threaded parts so now the cash stash threads internally where the candy or money would be stashed.Updated files for paid subscribers have already been uploaded!Quick side note, I've got one more Easter-related design I'm finishing up soon, so be on the lookout for that!As always, thank you all for the support!<ul class="ul ul1"><li class="listItem" value="1">Jacob</li></ul>

 Hey everyone! I've got a small update/fix I've made to the Annoying Easter Egg! One of our members shared an issue they had after printing. They filled the design with candy, and it ended up getting crushed due to the orientation of the threaded portions of the egg. I have swapped the threaded part

Annoying Easter Egg v2

**Thin Air Commercial Tier**

My one and only subscription tier, pay $10/month for:

1)  Access to My ENTIRE Library of Models (both paid and free)
2) My Permission to Print and Sell My Original Designs (Does Not Include Fan Art or Trademarked Designs)

**Subscribing to this plan does not give you permission to sell or re-distribute my digital files, only the prints you create from them.

I have plans to incorporate other benefits (Discord Access, Access to Private Tutorials, etc...) as they come available on this platform and/or as I can reasonably accommodate them.

**How does this differ from my Patreon?**
The benefits are virtually the same, access to all of my models and commercial rights.  The main differences at the moment are: 
- This membership has the advantage of Thangs' model sharing, which is great for viewing/browsing the models you would like to print.
- This membership doesn't yet include Discord access, but I have plans to set that up soon.
- The membership doesn't yet include access to the Private tutorials I have created, but I may be including that soon if there is any interest.

**Will I be closing down my Patreon?**
I have no plans of closing down my Patreon.  Ideally, both platforms would share close to identical benefits, allowing the user to choose which platform they most prefer.

Thin Air Commercial Tier

The Annoying Gift Box

annoying_box_bolt (need 20).stl

Really Annoying Card Container v3.0

annoying_box_thread_test.stl

Annoying Nested Gift Box

1. small_box_components (13 pieces).stl

Annoying Easter Egg

annoying_easter_egg_bottom.stl

Hey i'm Jacob.  I love 3D modeling and printing all the things.

You can found more at the links below:

https://beacons.ai/thinair3d

ThinAir3D

Designer posts