A single-gang wall plate designed to hold a Philips Hue Smart Button/Dimmer Remote, mounting directly over a standard single-gang electrical box, no drilling into drywall required beyond the existing switch plate screws. Available in a standard size and a slightly oversized “Large” version (+0.5cm on all sides) for covering paint buildup or slightly oversized wall openings.

Requires 2x 10mm x 2mm magnets per print (not included), see the included magnet assembly guide for installation steps.

Printed with the back face flat against the print bed for the best finish on the visible portion of the covers.

Settings:

• Infill: 15-20% (grid)
• Layer height: 0.16mm
• First layer height: 0.2mm
• Perimeters: 2
• Supports: Honeycomb pattern (auto-generated)

Designed in SolidWorks. Feedback and prints welcome!