A double-gang wall plate combining a Philips Hue Smart Button/Dimmer Remote holder on one side with either a blank panel or a decora/rocker cutout on the other, useful for mounting a Hue remote right next to an existing switch, or on its own with a blank second gang. Available in standard and oversized (+0.5cm all sides) versions.

Need the Hue holder on the opposite side? Don't rotate the part, rotating 180 degrees will point the holder the wrong way since its shape is directional. Instead, use your slicer's Mirror tool, which flips the geometry itself. In PrusaSlicer: right-click the model, click Mirror, then choose the axis to mirror about. I'm not familiar with other slicer software's mirror functions, but all slicers should have a similar option.

Try the X-axis first, if the holder still faces the same way, undo and try the Y-axis instead.

Requires 2x 10mm x 2mm magnets per print (not included), see the included magnet assembly guide for installation steps.

Printed with the back face flat against the print bed for the best finish on the visible portion of the covers.

Settings:

• Infill: 15-20% (grid)
• Layer height: 0.16mm
• First layer height: 0.2mm
• Perimeters: 2
• Supports: Honeycomb pattern (auto-generated)

Designed in SolidWorks. Feedback and prints welcome!