Birdhouse with perch

birdhouse-body2.stl

Fresnel lens

This is a 6" diameter fresnel lens replacement for a recessed ceiling light.

Mini floating shelf

Clacker

This is a simple percussion instrument.  Twist the handle to make the balls strike the resonator.  Supports are needed for underneath the resonator.  Feed a string through one of the balls (flat side toward the resonator) and then through the resonator and onto the other ball.  The string should be long enough to allow each ball to hit the center of the resonator.

Decorative bolt cap

This is a simple cap to attach to the six-sided head of a bolt.

Deck feeder

deck-feeder-base.stl

Circle drawing tool

This is a simple tool for drawing circles in 5 mm increments, from 20 mm up to 310 mm in diameter.

Phone monitor mount

Designed for a Mac's Continuity Camera feature, this simple mount clips onto the top of a computer monitor.

Window collection

arch-window-tall.stl

Grecian Column

grecian-column.stl

Picture frame turn button

This is a turn button for securing a photo or painting inside its frame.

Hanging toothbrush holder

hanging-toothbrush-holder.stl

Dowel cap

This was designed to fit a 20 mm diameter dowel that would have a 10 mm dowel crossing on top of it.

Fencing

flying-jets-fence-orig.stl

Flagpole for carousel building

This is a simple mast designed for the Mountain Park carousel building model I made.  http://www.karenandjay.com/mtpark/mpmodel/mpmodel.html

Organ valve chock

This was created as a chock to slide under sticking valves in an Artizan band organ.

Painting standoff

This is a simple painting standoff for when you have to paint two sides of a flat surface.  Just place as many as you need onto your build plate.

Old-style lantern

This is a simple lantern I made for a garden ornament.  It prints without supports

Railroad bridge

This is a simple bridge structure for a model railroad.  It prints on its back with no supports.

Circus wagon trash bin

This is a recreation of the trash bin that was at Mountain Park in Holyoke, MA. It looked like a circus wagon with a lion inside. The lion had an open mouth. There was a vacuum inside and when you placed your trash in the lion's mouth, it would get sucked inside.

The roof is a separate piece, as are the wheels. I adapted the lion head from Tevons: https://www.thingiverse.com/thing:2429239

This was designed for my Mountain Park model: http://www.karenandjay.com/mtpark/mpmodel/mpmodel.html

Dinosaur Den

dino-den-building.stl

Trikke T12 fork cap

This is a replacement cap (plug) for the front fork of a Trikke T12.

Branch supporter

This was designed to slide on top of a bamboo support post for a potted plant or tree in order to position the branches. It can be used with vines as well, or any other plant that tends to have branches that droop.

Mini golf obstacles

humpty-dumpty.stl

Wheel

This is a simple wheel that has a keyway cut into the hub.  It can be used on a vehicle or as a flywheel or a turbine.  There's a groove on the outside to accommodate an O-ring or drive belt.

Pole mount

I created this to turn a hanging bird feeder into a pole-mounted one.  The mount can be glued or screwed onto the bottom of the feeder.  It was designed to fit a 25 mm diameter post, when printed with a 75 mm diameter base.

Out of This World

OOTW-building.stl

Bread bag clip

This is a simple bread bag clip, like you'd see in a grocery store.

Hand pointer signs

this-way-right.stl

Roman numerals

I.stl

Build plate clips

These are simple clips to hold a glass build plate to the print bed.

Long staircase

This is a long set of stairs that led to the clambake pavilion at Mountain Park in Holyoke, MA.  It was designed for my park model:  http://www.karenandjay.com/mtpark/mpmodel/mpmodel.html

Souvenir stand

This is a recreation of the souvenir stand that was at Mountain Park in Holyoke, MA.  It was designed for my park model:  http://www.karenandjay.com/mtpark/mpmodel/mpmodel.html

Berzak rocket parts

This is the engine section.  Print it with the screw section facing down.

Berzak-ship-bottom.stl

Bumper pads

These can be used as feet or as side bumper protection.  #custom #thangs3d #pdo

Ender 3 cable guide

This is a cable guide for Creality's Ender 3 when modified with a direct drive extruder.  It was designed to attach to the Z-axis stepper motor. 

Squirrel silhouette

This is a simple silhouette of a squirrel.

Ticket booths

square-ticket-booth.stl

Game booth

This is the bottom section.  Originally it had a lot of thin vertical supports, but they wouldn't print properly.  So I redid them to be fewer and beefier.

game-booth-bottom-redux.stl

Kiddie turtle ride

Turtles-car.stl

Bubble Bounce ride

bubble-bounce.stl

Mini golf booth

This is a recreation of the miniature golf ticket booth at Mountain Park in Holyoke, MA.  Just glue the roof onto the bottom section.  It was designed for my park model:  http://www.karenandjay.com/mtpark/mpmodel/mpmodel.html

Kiddie boat ride

This is a recreation of the Herschell kiddie boat ride that was at Mountain Park in Holyoke, MA.  It was designed for my park model:  http://www.karenandjay.com/mtpark/mpmodel/mpmodel.html

Roto Whip

This is a simple recreation of the Hampton Roto Whip kiddie ride that was at Mountain Park in Holyoke, MA.  It was designed for my park model:  http://www.karenandjay.com/mtpark/mpmodel/mpmodel.html

Whip ride

Whip car

Popcorn stand

This is a recreation of the food stand that sold popcorn and Sno Cones at Mountain Park in Holyoke, MA.  It was designed for my model:  http://www.karenandjay.com/mtpark/mpmodel/mpmodel.html

Midway lunch stand

This is a recreation of the midway lunch stand at Mountain Park in Holyoke, MA.  It was designed for my park model:  http://www.karenandjay.com/mtpark/mpmodel/mpmodel.html

Maker at work sign

A plaque for your workshop.  #custom #thangs3d #pdo

Small tool holder

Here's a simple container for storing small tools for model work.  It can hang on a wall.  No supports needed.  #custom #thangs3D #pdo

Scarf hanger

This is a hanger for holding 7 silk scarfs.  No supports needed.  #custom #thangs3D #pdo

I got hooked 3D printing while building a scale model of an amusement park.  Note that since most of my models are designed with Blender, you’ll need to reduce their scale by 50% for printing.  

Thangijay

Achievements

Sequoia

Fan Favorite

Voyager