Modular lighthouse
15 downloads · 5 years ago · This is a lighthouse that you can build as tall as you want. Print the base 10% smaller each time.
This is a lighthouse that you can build as tall as you want. Print the base 10% smaller each time. The sections will stack one on top of another. When you have the number of sections you want, print the top piece and roof to fit. There's a hole in the center if you want to run a light to the top.
Garden Lighthouse
Gridfinity Baseplates
Gridfinity Divider Bins
8x8 MU - Center Grid Interfitted - MultiBoard Octagon Plate
6.25 mm - Quad Offset Snaps (DS Part A)
6.25 mm - Offset Snap (DS Part A)
6.25 mm - Dual Offset Snaps (DS Part A)
Raised Dual Snap (DS Part B)
Raised Quad Snap (DS Part B)
Raised Double-Sided Snap (DS Part B)
9x9 MU - Center Grid Interfitted - MultiBoard Octagon Plate
Raised Multiboard Snap
Offset Snaps Removal Tool
.jpg&w=3840&q=75)
Multiboard Demo Pack (FREE)
8x8 Multiboard Corner Legacy Tile
Ironing Stack - Test Print - Key Chain
8x8 Multiboard Side Legacy Tile
%2520in%2520aciton%25202.png&w=3840&q=75)
Snap (DS Part B)
6x6 MU - Center Grid Interfitted - MultiBoard Octagon Plate
