Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5180007.

I put The Rock's head on the Little Green Man alien from Toy Story.  

Pizza Planet Rock - Little Green Man

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5175578.

I put the Rock's head on the Tinkercad Duck.  It was a little front-heavy so he kept tipping over.  Therefore, I created a base.  The base was created in Fusion 360.  Once all the pieces were printed, I assembled it with super glue.  

Dwayne "The Ruck" Johnson

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5191423.

This is the trophy I designed for RoboSoccer.   All of the parts are separate.  So, it could easily be used for regular soccer.  My original drawings were in inches.  So, you will need to scale it by 254% when you open it in your slicing software.  Or, you can scale to whatever size you want.  You will need to paint the black portions of the ball.

Soccer Trophy - For RoboSoccer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5185682.

Garden Gnome Rock

Garden Rock - Dwayne "The Gnome" Johnson

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3876667.

I created this to replace the quick release plate for the Smith-Victor P820 Pinnacle Tripod.



Quick Release Plate for Tripod (P820)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5140848.

This is the lower wash arm nut for the Model #58714402400 Kenmore dishwasher.  The part number for this nut is #5304461011.  This part was discontinued by the manufacturer and I was unable to find one anywhere.  

The nut in my dishwasher cracked and broken into two pieces.  I was able to temporarily superglue it together in order to obtain measurements.  

Since it was for a dishwasher I was worried about the heat and bacteria.  So, I ordered some PETG.  This was my first PETG print. It is a little different than working with PLA.  Initially, I had some trouble getting the first layer to adhere to the print bed.  After doing a little research and tweaking, I was able to find the optimal settings for printing with PETG on my Ender 3 Pro.  I have included the settings so you can refer to them.



Kenmore Lower Wash Arm Nut Part # 5304461011

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1648664.

This is a modification of KU-0316 HP KEYBOARD RIGHT FOOT by coopep 

This foot can be used on either side of the keyboard.
This modification provides the little foot that folds inside the longer foot.



Keyboard Foot for HP KU-0316 (long and short)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1962498.

This is the front bezel for the 3.5" drive bay on a small form factor HP5800.  It may fit other models but I have only tested it on the 5800.

HP Front Bezel 3.5" for HP5800 SFF

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Tech_rob

Achievements

Seedling

Fan Favorite