This Week's Drop: Spectator 🪼👁️

Basically a smaller, slightly more insane cousin of the Beholder. I wanted this one to feel different from the Beholder I sculpted before, so I gave it a more playful pose. Instead of floating in mid-air, this one is resting on its giant tongue, which also makes it easier to print.

Print Details

• Easy to print
• Support-free design
• Optimized for multicolor FDM
• Matte PLA recommended to hide layer lines

Note: Use the feature tree to change the colors. Not the paint tool!

Includes: Spectator

• Multicolor 3MF file (for multimaterial printers & toolchangers)
• Single-color STL file (for resin or single-extruder FDM)

Size & Print Settings: 46x30x61mm 100% Scale (40mm miniature): Recommended nozzle: 0.4mm (standard) Recommended layer height: 0.12 mm

75% Scale (32mm miniature): 34x23x46mm 66% Scale (28mm miniature): 30x20x40 mm Recommended nozzle: 0.2mm Recommended layer height: 0.08 mm (or smaller)

Note: I design my minis at 40mm scale because it’s the sweet spot for clean results on a 0.4mm nozzle while still fitting a standard 1-inch grid. If you know what you’re doing and have a smaller nozzle, you can absolutely scale smaller.

This product is not affiliated with, endorsed, or approved by Wizards of the Coast.