This Week's Drop: Shadows 👁️‍🗨️👁️‍🗨️👁️‍🗨️

I needed Shadows for the first chapter of Vampire Mists, and instead of giving them a humanoid look, I decided to go for something a little different!

This drop includes: 3 Shadows

• Multicolor 3MF file (for multimaterial printers & toolchangers)
• Single-color STL file (for resin or single-extruder FDM)

Key Features

• Easy to print
• Support-free design
• Optimized for multicolor FDM
• Matte PLA recommended to hide layer lines

Note: Use the feature tree to change the colors. Not the paint tool!

Size & Print Settings: 100% Scale (40mm miniature): 44x45x44 mm

• Recommended nozzle: 0.4mm (standard)
• Recommended layer height: 0.12 mm

75% Scale (28/32mm miniature): 33x34x33 mm

• Recommended nozzle: 0.2mm
• Recommended layer height: ≤ 0.08 mm

Note: I design my minis at 40mm scale because it’s the sweet spot for clean results on a 0.4mm nozzle while still fitting a standard 1-inch grid. If you know what you’re doing and have a smaller nozzle, you can absolutely scale smaller.

This product is not affiliated with, endorsed, or approved by Wizards of the Coast.